Fosroc Nitocote CM210 Liquid 5Kg and Powder 18Kg White 23Kg

Nitocote CM210 can be used in a variety of applications, including potable water retaining structures, swimming pools, internal basement waterproofing, drainage culverts, and damp proofing for facades. It is effective in environments exposed to saline conditions as well.

The product offers several advantages, such as excellent crack accommodation before and after immersion, high resistance to both positive and negative hydrostatic pressures, and a strong bond to concrete and masonry. It is also easy to apply using various methods like brush, roller, or spray.

Nitocote CM210 has a pot life of approximately 2 hours at 20°C and can withstand a positive water pressure of up to 5 bar (50m head) and a negative pressure of 2 bar (20m head). The cured coating also exhibits excellent abrasion resistance and crack accommodation capabilities.

The product is supplied in a pre-packaged form that requires mixing on-site with a slow-speed drill fitted with a mixing paddle. It should be applied in two coats of 1mm dry film thickness each to ensure proper coverage and effectiveness.

Yes, Nitocote CM210 is approved for use in contact with potable water as per the Water Regulations Advisory Scheme (WRAS) standards. It complies with BS 6920:2000 regarding its effect on water quality.

Nitocote CM210 is available in two colours: grey and white. This allows for aesthetic flexibility depending on the application requirements.

The product complies with several standards, including BS 6920:2000 for water quality effects, DIN 1048 for water penetration testing, and ASTM E84 for flame spread index classification. These certifications ensure its reliability and safety in various applications.

Fosroc Nitocote CM210 is a two-component polymer modified cementitious coating designed for waterproofing applications. It provides an elastomeric, crack-bridging waterproof coating suitable for various structures, including potable water tanks and swimming pools.

Nitocote CM210 is typically used for potable water retaining structures, internal basement waterproofing, swimming pools, drainage culverts, and wet areas like kitchens and bathrooms. It is also effective as a damp proofing solution for foundations in contact with groundwater.

This product withstands high hydrostatic pressures, has excellent crack accommodation before and after immersion, and bonds well to concrete and masonry. It is also approved for contact with potable water, ensuring safety in water-related applications.

At 20°C, the pot life of Nitocote CM210 is approximately 2 hours, while at 35°C it reduces to about 1 hour. This indicates the time available for application after mixing before the material begins to set.

After curing for 21 days at 23°C and subsequent immersion, Nitocote CM210 can resist a positive water pressure of up to 5-7 bar and a negative pressure of 2-3 bar depending on testing standards. The mixed density is around 1850 kg/m³.

The minimum application temperature for this product is 5°C. Applying it below this temperature may affect its performance and adhesion properties.

Nitocote CM210 can be applied using a brush, trowel, or spray methods. For best results, it is recommended to finish the surface with a trowel after application to ensure a smooth and effective waterproof membrane.