Fosroc Nitoflor FC150 Neutral Base with Hardener, Industrial Flooring Resin/Topping System Component

Nitoflor FC150 consists of a base, hardener, and colour pot. For slip resistance, Nitoflor Antislip Grains can be incorporated into the system. The system is available in various colours using Nitoflor Colour Pots.

Nitoflor FC150 has a compressive strength of 70 N/mm², flexural strength of 40 N/mm², and tensile strength of 20 N/mm². It also has a Shore D hardness of 77-85 and water absorption of less than 0.1%.

Nitoflor FC150 is applied in two coats to achieve a total dry film thickness of approximately 400-500 microns. Each coat should be at least 200 microns thick.

At 20°C, the cure time for foot traffic is 24 hours, and for full traffic, it is 48 hours. At 30°C, these times reduce to 18 hours and 24 hours, respectively.

Yes, Nitoflor FC150 is highly resistant to a wide range of industrial chemicals, including acids like lactic, citric, and acetic acid. It is suitable for areas where chemical spillage is likely.

Nitoflor FC150 provides slip resistance when used with Nitoflor Antislip Grains, improving safety for personnel and plant. It also offers a hygienic, impervious finish that is easily cleaned.

Yes, Nitoflor FC150 HP is HACCP certified for use in food handling areas, such as kitchens and production areas. This makes it suitable for environments requiring strict hygiene standards.