Fosroc Nitoprime SP Base 4Kg with Hardener 4Kg

The product consists of a 4Kg base component and a 4Kg hardener component, which must be mixed together before application. This combination ensures optimal performance and adhesion to various surfaces.

Nitoprime SP is ideal for use in conjunction with the Nitoflor range of epoxy resin coatings, toppings, and screeds. It is particularly effective in environments where strong chemical resistance and durability are required.

The standard coverage for Nitoprime SP is approximately 8 m² per litre. However, actual coverage may vary based on substrate conditions and application techniques.

To mix, add the entire contents of the hardener can to the base can and stir thoroughly using a slow-speed drill with a paddle. The primer should then be applied in a thin, continuous film using rollers or brushes.

The primer typically achieves a tack-free condition within a few hours, allowing for top coat application after it has cured adequately. Full curing time may vary based on environmental conditions.

Yes, it should be stored in a cool, dry place away from direct sunlight and extreme temperatures to maintain its effectiveness and extend shelf life.

Users should wear appropriate personal protective equipment (PPE), including gloves and eye protection, during application. Proper ventilation is also recommended to minimize inhalation of vapours.