Fosroc Nitoproof 10, 200L, Concrete Curing Compound for Reduced Water Loss

Nitoproof 10 is primarily used as a waterproofing solution for concrete and masonry, acting as a damp-proof membrane and curing membrane. It is suitable for both interior and exterior applications, including foundation protection and below-ground structures.

The product is easy to apply, economical, and multipurpose, functioning as both a protective coating and curing membrane. Additionally, it contains no solvents, making it non-hazardous to health, and it resists attack from chloride and sulphate ions found in groundwater.

Nitoproof 10 can be applied using a brush, broom, or squeegee. It is recommended to apply one or two coats depending on the required level of protection, allowing a minimum of two hours between coats.

The coverage rate for Nitoproof 10 is approximately 2.0 to 5.0 square meters per litre, depending on the substrate condition. This ensures effective waterproofing and curing when applied correctly.

Nitoproof 10 should be stored under normal warehouse conditions at temperatures between 15°C and 40°C. It has a shelf life of 12 months but must be protected from temperatures below 10°C to maintain its effectiveness.

Yes, Nitoproof 10 exhibits resistance to various chemicals including potable water, seawater, and groundwater. This chemical resistance makes it suitable for use in environments where exposure to such substances is likely.

While Nitoproof 10 itself is not flammable, it should be used in well-ventilated areas away from open flames or smoking. Proper safety measures should be followed during application to ensure safe handling of the product.