Fosroc Nitotile Grout, 20KG, Cement Tile Grout for Filling Joints with Consistent Colour Finish - Chocolate Brown

It can be used with all types of tiles, including ceramic and porcelain, for interior and exterior tiling projects. It’s formulated to provide good adhesion and a durable finish across diverse tile types.

Yes. This grout is designed for wet areas such as bathrooms and kitchens, as well as high-traffic environments, delivering a strong, water-resistant joint that helps resist mould and environmental contaminants.

1) Clean and dry the tile joints. 2) In a clean mixing container, add water gradually to the 20kg bag and mix to a smooth, lump-free paste using a slow-speed mixer or a trowel. 3) Press the grout into the joints with a rubber float at a 45-degree angle, ensuring joints are fully filled. 4) Remove excess grout with the float, then wipe the tile surfaces with a damp sponge to remove haze after the initial set. 5) Allow the grout to cure under normal room conditions and avoid exposing it to excess moisture before full cure.

Sealing is not strictly required, but applying a suitable sealant after the grout has fully cured can improve water resistance and stain resistance, especially in wet areas or where heavy staining is a concern.

Regular cleaning with mild detergents and water is recommended. Avoid acidic or abrasive cleaners that could damage the grout. For stubborn stains, re-clean with a damp sponge and allow the area to dry before exposing it to moisture.

Wear appropriate PPE such as gloves, eye protection, and a dust mask when mixing. Work in a well-ventilated area. Follow the Safety Data Sheet (SDS) for handling instructions, storage, and disposal, and wash hands after handling the product.

If cracking occurs, remove the affected grout carefully with a grout saw or chisel after the area has fully cured, clean the joints, and reapply fresh grout. Ensure the substrate and tiles are stable to prevent recurrence.

Coverage depends on joint width and tile size. The 20kg bag is designed for typical tiling projects, providing enough material to fill multiple joints across standard-sized tiles. For precise estimates, measure your tile area and joint dimensions and refer to the coverage guidance in the product technical data.

If you’re choosing a color match or different performance needs, you can compare Nitotile Grout Chocolate Brown with other Fosroc grout options available on Fepy: - Fosroc Nitotile Grout Grey 20kg: https://fepy.com/product/fosroc-nitotile-grout-grey-20kg - Fosroc Nitotile Grout White 20kg: https://fepy.com/product/fosroc-nitotile-grout-white-20kg Both have similar performance characteristics; color choice depends on tile color and aesthetic preference.