Fosroc Nitotile Grout, 20KG, Cement Tile Grout for Filling Joints with Consistent Colour Finish - Sand Stone

Fosroc Nitotile Grout-Sand is a fast-drying, cementitious, sanded tile grout designed for ceramic tiles and stone. It provides a strong bond, fills joints, and is suitable for areas exposed to moisture such as bathrooms, kitchens, and exterior walls.

Its formulation emphasizes strong bonding, durability, and mildew resistance, which helps it perform in damp environments like showers, countertops, and wet rooms. It also features a dust-free mix for easier handling and application in humid spaces.

The product is sold in a 20 kg flex-pack bag. It’s a cementitious, sanded grout blended with polymers to ensure a durable, strong grout joint with good water resistance and longevity in tile installations.

It is compatible with ceramic tiles and natural stone surfaces. It’s suitable for interior and exterior tiling in residential or commercial projects where a sanded grout is appropriate.

Add clean water gradually to the 20 kg bag until you achieve a smooth, lump-free paste with a peanut-butter-like consistency. Use a drill mixer for uniform mixing, let the mix slake briefly, then remix. Press the grout into joints with a rubber float at a diagonal angle, sweep off excess grout, and clean tile surfaces with a damp sponge before it hardens.

Nitotile Grout-Sand is fast-drying, with initial set occurring within a few hours in typical conditions. Full curing times vary with temperature and humidity, so avoid exposing the grout to heavy traffic until it has adequately cured as per environmental conditions.

After grouting, remove excess material promptly and clean tile surfaces with a damp sponge to avoid haze. Tools can be cleaned with water. If haze remains after initial cleaning, follow up with a gentle cleaning method once the grout is firm.

Sealing is optional but recommended for added stain resistance and easier maintenance. If you choose to seal, wait at least 72 hours after installation to allow the grout to cure before applying a penetrating grout sealer suitable for cementitious grouts.

Sanded grout like Nitotile Grout-Sand is typically used for joints 2 mm to 6 mm wide. For most floor and wall tiling, a joint width of 2–4 mm is common; larger format tiles may use up to 5–6 mm depending on tile size and substrate movement considerations.

Fosroc Nitotile Grout-Sand and Mapei Ultracolor Plus FA are both cementitious, sanded grouts suitable for moisture-prone areas. Nitotile Grout-Sand is described as fast-drying with a dust-free mix and strong bonding, while Ultracolor Plus FA emphasizes color fastness and stain resistance with its own set of performance characteristics. For a direct side-by-side look on Fepy, you can compare products here: https://fepy.com/product/mapei-ultracolor-plus-fa-25kg

Yes, it is designed for use in exterior walls and other areas subject to moisture and foot traffic. It provides a durable, long-lasting grout joint suitable for both interior and exterior tiling projects, provided the installation guidelines are followed and proper curing is allowed.

Wear appropriate PPE such as gloves and eye protection. Work in a well-ventilated area, and avoid skin contact with the dry powder and wet grout. Keep out of reach of children, and ensure tools are cleaned with water after use.