Funbo Foam Board, 70 × 100 cm, 0.5 cm, Lightweight, Easy-Cut, Smooth Paper Surface, Ideal for Mounting, Models & Craft Displays – Dark Green

Size: 70 × 100 cm. Thickness: 5 mm (0.5 cm). Color: Dark green. Core: Rigid foam with a smooth paper surface. Weight: Lightweight for easy handling and transport. Surface: Smooth paper facing that accepts ink and adhesives evenly. Edges: Clean cuts with standard hobby knives.

Use a sharp hobby knife or craft knife along with a straight edge or ruler. Lightly score along the line and apply steady, even pressure to achieve clean, precise cuts without tearing the paper facing.

The smooth paper facing accepts spray adhesives and double-sided tapes well. You can also use PVA or craft glues for mounting lightweight items. Always test on a scrap area first and allow glue to dry fully for a secure hold.

Ideal for signage, science fairs, display panels, model landscaping bases, classroom charts, mounting posters, and craft displays. Its large size and light weight make it convenient for freestanding displays and easy transport.

Store flat to prevent warping and keep away from moisture. If transporting, use edge protectors or a rigid case to protect against bending. Avoid stacking heavy items on top to maintain a smooth surface.

Yes, it is designed for general DIY, classroom, and craft use. As with all foam boards, avoid ingestion, keep away from heat sources, and supervise children when cutting or handling edges to prevent injury.

This model is a larger 70 × 100 cm board with a 5 mm thickness and a dark green surface, offering a combination of large display area and durable rigidity. It differs from thinner or smaller variants in thickness, size, and color to suit specific project needs.

Yes. The smooth paper facing is well-suited for ink and adhesives, making it easy to mount photos, printed graphics, or posters using spray adhesive, double-sided tape, or glue. Ensure surfaces are clean and dry before mounting.

You can use light acrylic sprays or sealants to protect the surface, but test compatibility with adhesives and ink beforehand. Avoid saturating the surface, as excessive moisture can affect the paper facing and the foam core.

It combines a rigid 5 mm foam core with a large 70 × 100 cm surface, lightweight handling, and a smooth paper surface that accepts inks and adhesives well. Its size and ease of cutting reduce setup time and material waste, delivering cost-efficient, professional results for displays and crafts.

If you’re using removable tape or lightly applied spray adhesives, you may reposition briefly before the adhesive sets. Once fully bonded, removal can damage the surface or peel the paper facing, so plan the layout carefully and test removal in a small area first.