20cm x 250cm GI Lintel

Compared to non-galvanized or alternate materials, GI Lintels offer enhanced corrosion resistance and longer service life due to galvanization. For a quick side-by-side, you can explore similar options on Fepy such as galvanized steel lintels and other metal lintels here: https://fepy.com/product/galvanized-steel-lintel and https://fepy.com/product/mild-steel-lintel-non-galvanized. If you’re considering lighter or different materials, you can also review aluminum lintels at https://fepy.com/product/aluminum-lintel.

If you’re unsure about fit or project requirements, you can refer to Fepy’s general return policy for eligibility, timeframes, and instructions. It’s a good idea to keep the packaging intact and contact support within the specified window to discuss options.

GI lintels are a common, code-adaptable solution for many masonry openings. Always verify local building codes and project specifications, and use the correct size and bearing as required for your site.

Wear appropriate PPE (gloves, eye protection, steel-toe boots), avoid bending or dropping heavy lintels, use proper lifting techniques or equipment, and ensure the lintel is stored flat and undamaged before installation to prevent sharp edges or compromising the coating.

Typical steps: (1) prepare and level the supporting masonry, (2) place temporary supports, (3) position the lintel so it sits evenly on the bearing points, (4) bed the lintel in mortar or a suitable bedding, (5) ensure it is level and centered, (6) complete masonry above and around the ends, and (7) allow proper curing before loading the opening.

Measure the opening width and choose a lintel that spans the opening with adequate end bearing on each side. For load-bearing or larger openings, consult structural guidelines or a qualified engineer to ensure the lintel can support the expected load.

They are used to support masonry or timber above openings such as doors and windows in walls, suitable for a wide range of applications from residential to light industrial projects where a durable load-bearing member is needed.

GI lintels offer superior durability and a longer lifespan in many environments due to corrosion protection from the galvanization, making them a more maintenance-free choice for both exterior and interior openings.

The hot-dip galvanized coating on the mild steel provides a protective layer that resists rust and corrosion, making GI lintels well-suited for exterior use and damp environments with reduced maintenance over time.

A GI Lintel is a structural steel beam made from mild steel that has a hot-dip galvanized coating. It sits above openings like windows or doors in walls to transfer the load from the masonry above to the sides of the opening, helping to prevent cracks and sagging.

Yes, these Galvanized (GI) Lintel-20CM X 250CM available at FEPY are completely rust resistant.

After your order placement, our team starts loading your order in our delivery trucks and we ensure quick delivery of your order.

We do provide offloading services, but we do not provide installation services.

Yes, we do provide equipment for fitting and maintenance. You can check out our power tools, hand tools, and hardware tool categories.