4 x 300cm Galvanized Iron Lintel

Key specs: quantity 4 pieces, each 300 cm long, 4 cm width, galvanised coating for rust and corrosion resistance, high load-bearing capacity, corrosion-resistant finish for damp/outdoor environments, pre-cut length to speed up installation, and a design intended for long-span openings.

The pack includes four galvanised iron lintels, each 300 cm in length.

- 4 x 320cm Galvanized Iron Lintel: longer span per lintel for wider openings. URL: https://fepy.com/product/4-x-320cm-galvanized-iron-lintel - 4 x 275cm Galvanized Iron Lintel: shorter span option for smaller openings. URL: https://fepy.com/product/4-x-275cm-galvanized-iron-lintel - Galvanized Steel Lintel 300cm: a single 300 cm lintel option with similar galvanised coating. URL: https://fepy.com/product/galvanized-steel-lintel-300cm These alternatives are available on Fepy and let you choose based on opening width and project needs.

Yes. The galvanized coating provides superior rust and corrosion resistance, making it suitable for damp and outdoor environments where structural lintels are exposed to moisture.

General installation guidance: measure the opening and determine bearing lengths, position the lintels on temporary supports, ensure they are level and centered, place them across the opening with appropriate bearing on each side (bearing lengths depend on the wall type), and fill any gaps with mortar once the lintel is seated. After installation, secure the surrounding masonry and allow mortar to cure per standard building practices. If unsure, consult a professional for structural guidance.

Safety tips: wear gloves and eye protection when handling to prevent cuts from edges, use proper lifting techniques or assistance for the four 300 cm pieces, avoid dropping or bending the lintels, ensure stable staging and supports during installation, and follow local building codes and best practices for bearing and mortar curing.

These lintels are designed for high load-bearing applications typical of door and window openings. The exact load rating depends on opening width, wall type, and installation method. For precise values, consult the product documentation or a qualified structural professional.

Yes. The product is described as having a pre-cut length to reduce on-site preparation time, with each piece measuring 300 cm in length. Verify dimensions on the specific product listing to ensure they fit your opening.

Choose length based on the opening width, ensuring there is adequate bearing on both sides (commonly bearing on each side is specified by local codes or the project engineer). The width for this product is 4 cm, and you should match it to the wall cavity and brick/masonry profiles. If in doubt, consult a structural professional.

Yes. If you need to return, refer to Fepy’s return policy for eligibility, timeframes, and the process to initiate a return.