Name: Galvanized (GI) Lintel 6 X 180cm
Brand: Fepy
SKU: 15510-NOS
Price: 37.33 AED
Availability: InStock

Question 1

What is the Galvanized GI Lintel 6x180 cm and what is it used for?

Accepted Answer

The Galvanized GI Lintel 6x180 cm is a structural steel header used to span above openings (like doors or windows) in brick or block walls. It’s hot-dipped galvanized for corrosion resistance and provides load transfer from the wall onto the sides of the opening.

Question 2

What do the dimensions 6x180 cm mean for this lintel?

Accepted Answer

The lintel measures 6 cm in thickness and 180 cm in length. It is designed to span openings up to about 180 cm wide while transferring loads from the wall above to the sides.

Question 3

How much weight can this lintel support?

Accepted Answer

This GI lintel is rated to support up to 200 kg (approximately 440 lbs) of load.

Question 4

What material is it made from and how does the coating help?

Accepted Answer

It is made from hot-dipped galvanized steel, offering anti-rust protection and enhanced durability for both exterior and interior use.

Question 5

Where can I use this lintel—exterior, interior, or both?

Accepted Answer

It is suitable for both exterior and interior applications, including residential and commercial wall openings.

Question 6

How do I install the GI lintel correctly?

Accepted Answer

General steps: ensure the opening width matches the lintel length, place the lintel on prepared bearing supports, bed it with mortar, verify it is level, and then proceed with brickwork on both sides, allowing proper mortar curing. For the best results, align with your project specs or consult a structural professional for large openings.

Question 7

What tools or preparations do I need for installation?

Accepted Answer

Typical tools include a tape measure, a level, a trowel for mortar, mortar mix, protective gear, and shims as needed to ensure a true, level placement before brickwork resumes.

Question 8

Can I cut or modify this lintel to fit a smaller opening?

Accepted Answer

Modifying or cutting a lintel can compromise structural integrity and is generally not recommended. If a smaller opening is required, choose a lintel size that matches the opening or consult a structural engineer.

Question 9

How should I maintain the lintel to maximize longevity?

Accepted Answer

Rely on the galvanized coating for corrosion resistance; perform periodic visual inspections for any signs of rust or damage, especially at edges, and keep the top of the lintel clear of debris to allow proper mortar curing and maintenance.

Question 10

Are there safety or compliance considerations I should be aware of?

Accepted Answer

Ensure the lintel is used within its rated load capacity and installed according to standard masonry practices. For larger openings or unique structural conditions, consulting a qualified professional is recommended.

Question 11

How does this lintel compare to other GI lintels available on Fepy?

Accepted Answer

If you’re considering different sizes, here are some alternatives on Fepy you might compare: - Galvanized (GI) Lintel 6x150 cm: https://fepy.com/product/galvanized-lintel-6x150cm - Galvanized (GI) Lintel 6x200 cm: https://fepy.com/product/galvanized-lintel-6x200cm - Galvanized (GI) Lintel 8x180 cm: https://fepy.com/product/galvanized-lintel-8x180cm

Question 12

How should I choose between the 6x180 cm lintel and other sizes available on Fepy?

Accepted Answer

Select based on your opening width (choose a lintel that spans the opening with adequate bearing on both sides), expected load, and alignment with wall construction. For openings close to 180 cm, the 6x180 cm version provides a straightforward fit with corrosion-resistant benefits.

Galvanized (GI) Lintel 6 X 180cm

Features & Benefits

Specification

Attachments

Frequently Asked Questions