Galvanized (GI) Lintel 6 X 200cm

Key specs: length of 200 cm (6 x 200 cm), galvanised coating for corrosion resistance, intended for load-bearing wall applications, sturdy construction and relatively easy on-site handling and installation.

Ideal for load-bearing walls with openings such as doors and windows in residential and commercial buildings. It provides reliable support above openings and is suitable for both new constructions and renovations where a galvanized steel lintel is appropriate.

General steps: measure the opening width and confirm bearing requirements on each side, prepare a clean rough opening, position temporary supports to bear the weight, place the lintel on the supports ensuring it is level, bed and support ends with appropriate mortar or sealant, secure alignment, and allow proper curing before applying loads. If in doubt, consult a qualified professional.

Typical items include a tape measure, spirit level, chalk line, plumb line, masonry shims, temporary supports, mortar or sealant for bearing surfaces, protective gloves and eye protection, and basic masonry tools for readying the opening and bedding the lintel.

Wear appropriate PPE (gloves, eye protection, steel-toed boots). Use proper lifting techniques or mechanical assistance for heavy pieces. Ensure the opening is adequately supported during installation to avoid collapse. Do not modify the lintel length by cutting, as this can compromise structural integrity.

Lintel length should overhang the opening bearings on both sides. Typical bearing lengths are selected per project specs, but a common rule is to have 50–150 mm of bearing on each side depending on design. The 200 cm length is suitable for openings up to near 200 cm, with appropriate end bearings. For precise sizing, consult your structural engineer or refer to project design requirements.

Regularly inspect for signs of corrosion, paint or coating damage, or pitting. Clean the surface with mild detergent and water if needed, and avoid harsh cleaners. If the galvanised coating is compromised, seek professional assessment to determine if recoating or replacement is required.

The GI lintel is designed for load-bearing applications and corrosion resistance. Compliance with local building codes depends on the project and region, so verify with a structural engineer or local authority to ensure it meets your specific standards.

Returns are subject to Fepy’s policy for construction products. If the item is unused, undamaged, and returned within the policy window, you may be eligible for a return or exchange per the platform’s terms.

Similar options on Fepy include alternatives in different lengths or materials. For example, you can consider: - Galvanized Lintel 4x200cm: https://fepy.com/product/galvanized-lintel-4x200cm - Galvanized Lintel 6x240cm: https://fepy.com/product/galvanized-lintel-6x240cm - Stainless Steel Lintel 6x200cm: https://fepy.com/product/stainless-steel-lintel-6x200cm Each option offers different bearing lengths and corrosion resistance, so choose based on opening width, load requirements, and environmental exposure.

Other length options often include 4x200cm and 6x240cm variants. Examples you can explore are: - https://fepy.com/product/galvanized-lintel-4x200cm - https://fepy.com/product/galvanized-lintel-6x240cm These can suit openings that are wider or require different bearing configurations.