Geepas Percussion/Rotary Drill with Lock-On Switch, 13mm 900W, Used for Heavy-Duty Drilling in Concrete and Steel

It’s a versatile drill that combines percussion (hammer) action and rotary drilling in one tool. Featuring a 13mm keyed chuck and a multi-function lock-on switch for safer, continuous drilling, it’s intended for DIY home projects and can handle drilling in masonry, wood, and metal when used with appropriate bits. The depth-stop helps ensure consistent hole depth.

A 13mm keyed chuck accepts bits with a 13mm shank. You'll need a chuck key to tighten or loosen bits in the chuck. This size is suitable for common masonry, wood, and metal bits used in home projects.

The multi-function lock-on switch prevents the impact/hammer action from activating when you’re in drilling (rotary) mode. This reduces accidental hammering and makes continuous drilling safer and more controllable.

The drill supports both percussion and rotary modes. Use the mode selector to choose percussion for hammer drilling or rotary for standard drilling. When you want uninterrupted rotary drilling, you can engage the lock-on feature to keep the drill running without needing to hold the trigger continuously.

With the appropriate bits, you can drill masonry (brick/concrete) using percussion mode, as well as wood and metal in rotary or percussion modes. It’s well-suited for DIY home tasks such as wall anchors, cabinet holes, or metal fastener pilot holes.

The depth stop is a movable control that limits how deep you can drill. To use it, loosen the stop knob, set the stop at the desired drilling depth against the workpiece, and then tighten the knob to lock it in place before drilling.

Wear eye protection and other appropriate PPE, unplug the drill before changing bits, ensure the bit is properly tightened in the chuck, clamp workpieces securely, avoid applying excessive force, and keep the work area clean and dry. Use the correct bit for the material and mode you’re using.

Keep the chuck and bit area clean, inspect bits for wear, avoid overheating by using appropriate speeds and feeds, and store the tool in a dry place. If the manufacturer recommends lubrication for the chuck, apply it as directed and follow any servicing guidelines in the user manual.

The 13mm model offers a larger chuck capacity (13mm) for bigger bits and potentially more material options, while the 10mm percussion drill is typically lighter and suited for smaller, lighter-duty jobs. If you’re drilling larger holes or using bigger bits, the 13mm version is the more capable choice. See: https://fepy.com/geepas-10mm-percussion-drill

The Geepas 13mm rotary drill focuses on rotary drilling without hammer action, whereas this model combines percussion with rotary drilling and includes a lock-on switch for safer continuous drilling. If you need hammer impact for masonry, this dual-action model is preferable. See: https://fepy.com/geepas-13mm-rotary-drill

Yes for many DIYers who need both hammer and rotary drilling in one tool. It offers a versatile 13mm chuck, a lock-on safety feature, and a depth stop for consistent results. When deciding, consider the range of tasks you’ll tackle, the frequency of use, and whether you’ll benefit from having both hammer and rotary modes in one tool.

Ideal for drilling holes in brick or concrete for anchors, pilot holes in wood, and metal drilling with appropriate bits. It’s suitable for mounting shelves, installing fixtures, woodworking projects, and other typical DIY tasks around the home where both hammer and rotary drilling capability is advantageous.