Geepas Rotary Hammer, 20mm, 600W, SDS-Plus, Used for Heavy-Duty Drilling and Chiselling in Concrete and Masonry

Core specs include a 600W motor, SDS Plus 20mm chuck, and impact energy rated at about 1.8 J in the official specification (marketing bullets also reference up to 2.7 J). It supports drilling, hammering, and chiseling modes, has a safety switch, overload protector, a rubber-coated grip, and a robust aluminum frame for durability.

It's designed for masonry and concrete applications such as drilling holes in concrete walls or bricks, chiseling out construction debris, removing tile in bathrooms or kitchens, and light stone work. It handles common masonry tasks with 20mm SDS Plus bits.

The SDS Plus chuck allows quick, tool-free bit changes. Simply align the bit with the chuck, insert it until it seats, and lock it in place. For removal, pull back the collar or use the release mechanism to extract the bit before inserting a new one.

It supports drilling, hammering (impact drilling) for concrete and masonry, and chiseling for material removal. Use hammering mode for most masonry drilling, chiseling mode for removing material, and drilling mode for precision when impact is not needed.

Unplug the tool or switch off power before changing bits. Set the tool to the desired mode, release the SDS collar, insert the 20mm SDS Plus bit fully, and lock it in place. When removing, release the collar and pull the bit out straight to avoid binding.

Key safety features include a safety switch to prevent accidental start, an overload protector to reduce motor stress, and a rubber-coated grip to improve control and reduce fatigue. Always wear eye protection, hearing protection, gloves, and a dust mask when using this tool.

When choosing, compare motor power, impact energy, chuck type, weight, and ergonomic design. For similar Geepas models available on Fepy, you can review: Geepas GRH2050-240 600W Rotary Hammer at https://fepy.com/product/geepas-grh2050-240-600w-rotary-hammer and Geepas GRH2080-240 600W Rotary Hammer at https://fepy.com/product/geepas-grh2080-240-600w-rotary-hammer. These pages offer related specs and accessory options to help determine the best fit for your tasks.

Plan your hole locations, mark the spots, and ensure the surface is clean. Start in hammering mode at a low speed to establish the drill bite, then gradually increase speed and pressure. Use the correct 20mm SDS Plus bit for concrete, and periodically withdraw the bit to clear dust and cooling. Always ensure the bit is properly seated and the tool is off when changing bits.

Keep air vents clear of debris, clean the tool after use, and store it in a dry place. Use quality SDS Plus bits and avoid forcing the tool beyond its capabilities. Periodically inspect the power cord and the chuck for wear, and allow the tool to cool during extended use to prevent overheating.

Yes. With a 600W motor and 20mm SDS Plus capability, it is well-suited for DIY tasks and light-to-moderate professional use. Its safety features and ergonomic design help make it manageable for occasional projects while still offering robust performance for more frequent use.

You can browse 20mm SDS Plus bits and compatible accessories on Fepy by searching the store for SDS Plus bits, and then selecting items that fit a 20mm chuck. This ensures you have the right bit type and size for your Geepas rotary hammer and the tasks you’re performing.