Geepas Wall Mounted Bib Tap, Brass Body and Chrome Finish, Suitable for Kitchen & Basins

- Wall-mounted design for a modern look - Solid metal lever handle for smooth operation - Durable metal construction - Anti-rust coating for corrosion protection - Easy to install and suitable for bathrooms and kitchens

The tap is built from metal with an anti-rust coating to resist corrosion from moisture. It also has a solid metal lever handle and a wall-mounted body for a clean, sturdy appearance.

General installation steps: 1) Shut off the water supply. 2) Remove any existing faucet and prepare the wall pipework. 3) Mount the tap to the wall using the supplied bracket or fittings. 4) Connect the water inlet to the supply using standard 1/2 inch fittings (use appropriate hot/cold connections if needed). 5) Tighten connections securely and check for leaks. 6) Test operation to ensure smooth flow.

Wipe with a soft cloth and mild soap to keep the finish looking new. Avoid abrasive cleaners that could scratch the anti-rust coating. Periodically check for leaks and tighten fittings if needed.

Yes. The metal construction with anti-rust coating is designed for moisture-prone environments like bathrooms and kitchens. Ensure proper installation by following the steps above and, if unsure, consult a qualified plumber.

Ideal for bathroom basins, kitchen sinks, or utility sinks where a compact, wall-mounted faucet helps save space and provides a sleek, modern look.

Both are wall-mounted bib taps from Geepas with a similar modern design, metal body, and anti-rust coating. Differences may include finish nuances or inlet sizing. For a direct comparison, see the Geepas GSW61015 product page: https://fepy.com/geepas-gsw61015-wall-mounted-bib-tap

Geepas GSW61016 and Geepas GSW61017 are sibling wall-mounted bib taps with the same core purpose. Variations typically lie in minor design details or specifications. To compare them side by side, visit the Geepas GSW61017 page: https://fepy.com/geepas-gsw61017-wall-mounted-bib-tap

You get a durable metal body with an anti-rust coating, a modern wall-mounted design, and a smooth lever for effortless operation. Its ease of installation and compatibility with standard connections contribute to good value for bathrooms and kitchens.

Ensure your plumbing uses compatible inlet fittings (typically 1/2 inch/15 mm). Confirm there is adequate wall space for mounting, and verify that hot/cold supply needs align with your installation. Have the proper tools ready and consider professional installation if you’re not comfortable with plumbing work.

Yes. Use PTFE thread seal tape on male threads, hand-tighten connections first, then give them a gentle quarter-turn with a wrench. Avoid overtightening, and check all connections for leaks after turning the water back on.