Geepas 140mm Voltage Tester, 3mm Tip, Suitable for Basic Electrical Checking & Socket Testing

It supports AC and DC voltage testing up to 1000V. It can test for zero line and phase line presence, detect short circuits, and help verify power circuits and electronic components. The tester includes built-in guide circuits and back illustrations to assist with proper testing.

The tester uses a two-button design for basic operation. Typically, one button powers the unit on/off and the other initiates or confirms a test. For exact steps and mode selections, refer to the back diagrams on the device which provide testing guidance.

Key features include: 3-digit LCD display, voltage testing up to 1000V AC/DC, overload protection, built-in LED light for dark environments, compact pocket size for easy carry, low power consumption, and on-device diagrams that aid safe testing.

Follow basic electrical safety: de-energize circuits when possible before testing, wear appropriate PPE, and avoid testing near water or in damp conditions. Ensure the tester is rated for up to 1000V and use it only as intended. Keep fingers away from test points and use the built-in LED and LCD readout to interpret results carefully. Always refer to the back diagrams for correct test points.

Common use cases include checking household wiring, verifying that outlets or devices are energized, testing electronics components for voltage, identifying overloaded circuits, detecting open or shorted wiring, and assisting beginners and professionals in quick voltage verification.

Steps: (1) Install fresh batteries if needed. (2) Power on the unit using the designated button. (3) Bring the test probes near the point to be tested. (4) Read the voltage value on the 3-digit LCD. (5) Consult the back diagrams for proper test points and interpretation. (6) Power off when finished to conserve battery life.

Compared to non-contact voltage testers and other digital voltage meters on Fepy, this Geepas tester provides a full voltage reading (up to 1000V) on a 3-digit LCD, with overload protection and built-in guidance. For direct comparisons, you can explore these similar options on Fepy: Geepas Non-Contact Voltage Tester (https://fepy.com/geepas-non-contact-voltage-tester) and Geepas Digital Voltage Tester 1000V (https://fepy.com/geepas-digital-voltage-tester-1000v).

Value comes from a combination of features: a wide 1000V testing range, clear 3-digit LCD readings, safety features like overload protection, a built-in LED light for dim work areas, a compact form factor for portability, and on-device guidance to assist users of all levels.

Yes. Its simple two-button operation, 3-digit LCD display, and on-device guidance diagrams make it approachable for beginners, while the robust voltage range and built-in safety features meet the needs of professionals as a quick field verification tool.

You can review the standard return policy for this item on Fepy. If you have questions about eligibility or timeframes, check the product page’s returns section or contact Fepy support for guidance.

Results are shown on a 3-digit LCD display. A voltage value indicates the presence and approximate level of voltage at the tested point. Use the back diagrams for recommended test points and interpretation guidance to ensure correct readings and safe testing practices.