Name: 8mm Gi Flat Washer
Brand: Fepy
SKU: 15762-KG
Price: 9.50 AED
Availability: InStock

Question 1

What is an 8mm GI flat washer, and what is it used for?

Accepted Answer

An 8mm GI flat washer is a flat, disc-shaped fastener made from hot-dipped galvanized steel. It’s designed to distribute the load of a bolt or screw over a larger surface area, helping to prevent damage to the mating surfaces and reducing the chance of loosening. This particular washer is suitable for light tasks that use an 8mm bolt or hole.

Question 2

What are the key specifications for this washer?

Accepted Answer

Diameter: 8 mm; thickness: 1.6 mm; material: hot-dipped galvanized steel for corrosion resistance; pack quantity: 500 pieces per box; packaging is convenient for storage and quick access. It is also noted as being priced by the kilogram for value in bulk projects.

Question 3

Which bolt size does this washer fit?

Accepted Answer

This washer is designed for use with approximately 8 mm diameter bolts, commonly corresponding to M8 bolts. Always verify the bolt shank diameter to ensure a proper fit with the washer’s 8 mm opening.

Question 4

How does this 8mm GI flat washer compare to a 6mm GI flat washer available on Fepy?

Accepted Answer

The 8mm washer is sized for larger fasteners (M8-equivalent), providing greater load distribution for heavier connections. The 6mm GI flat washer is intended for smaller hardware. If you’re working with M6/M6-equivalent bolts, the 6mm variant would be more appropriate. You can view the 6mm option here: https://www.fepy.com/product/gi-flat-washer-6mm

Question 5

How does this 8mm GI flat washer compare to a stainless steel 8mm flat washer on Fepy?

Accepted Answer

The primary difference is material and corrosion resistance. This washer is hot-dipped galvanized steel, offering good corrosion resistance at a lower cost, suitable for many outdoor and general applications. A stainless steel 8mm washer offers superior corrosion resistance, especially in highly corrosive environments, but at a higher cost. Compare here: https://www.fepy.com/product/stainless-steel-flat-washer-8mm

Question 6

What are common use cases for this washer?

Accepted Answer

Common uses include general carpentry, light outdoor constructions, basic plumbing connections, and electrical installations where an 8mm bolt is used. The galvanized coating helps protect against rust in outdoor or semi-exposed environments.

Question 7

How do I install this washer correctly?

Accepted Answer

Install the washer between the bolt head (or nut) and the connected surface. Ensure surfaces are clean and flat, place the washer’s flat face against the surface, and tighten to the recommended torque for the bolt size you’re using. Using the correct washer thickness (1.6 mm) helps distribute load evenly and prevents surface marring.

Question 8

Are there safety or handling considerations I should be aware of?

Accepted Answer

Handle sharp edges with care to avoid cuts. The galvanized coating provides corrosion resistance, but avoid scratching the coating during handling and installation, which could expose bare metal. Store and use as directed to maintain coating integrity and prolong life.

Question 9

How should I store and maintain these washers?

Accepted Answer

Store in a dry, covered area away from moisture to prevent corrosion. Keep the box closed when not in use to protect from dust and moisture. Inspect periodically for any signs of rust or coating damage, especially after outdoor use.

Question 10

Is this product a good value for larger projects?

Accepted Answer

Yes. The box quantity of 500 pieces provides quick access for bulk projects, and the note that the washer is priced by the kilogram adds value when purchasing in larger quantities. If you’re running multiple builds, this setup minimizes reordering and helps keep costs predictable.

Question 11

Can I use this washer outdoors or in mildly corrosive environments?

Accepted Answer

The hot-dipped galvanized steel construction offers solid corrosion resistance for many outdoor tasks and general use. For highly corrosive or marine environments, you might consider stainless steel washers for longer-term protection against corrosion.

Question 12

If I need a different thickness or size, what options does Fepy offer?

Accepted Answer

Fepy carries a range of GI flat washers in different diameters and thicknesses to suit various bolt sizes and load requirements. For a smaller size, check the 6mm GI flat washer, and for a different material option, you can compare the stainless steel 8mm washer. See related options here: 6mm GI flat washer: https://www.fepy.com/product/gi-flat-washer-6mm; stainless steel 8mm flat washer: https://www.fepy.com/product/stainless-steel-flat-washer-8mm

8mm Gi Flat Washer

Features & Benefits

Specification

Attachments

Frequently Asked Questions