Gyproc Gypframe I-Stud 150I90 3000mm High-Stability Stud for Partition Framework

Dimensions: height 150mm, width 90mm, available in 2m, 3m, and 4m lengths. Material: high-grade galvanised steel for corrosion resistance and strong support for plasterboard, tiles and other wall elements.

Basic steps: plan your wall layout and locate studs, cut studs to the required length, fix them to floor, ceiling, and adjacent studs with appropriate screws, then attach plasterboard to the frame using compatible screws. Ensure vertical alignment and plumb, then proceed with jointing, taping, and finishing as you would with standard plasterboard walls.

Ideal for interior walls and partitions in both new builds and renovations. They provide a sturdy framework for plasterboard and can contribute to fire-stopping performance in appropriate wall assemblies when used as part of a tested system.

The 150x90 section offers higher load-bearing capacity and increased wall rigidity compared with smaller profiles, making it suitable for heavier plasterboard installations or where greater stiffness is needed. If you’re building thinner partitions or lighter loads, smaller sections may be more economical.

Available lengths are 2m, 3m and 4m. Choose based on wall height and layout: use 2m for shorter walls or shorter partition sections, 3m for standard wall heights, and 4m for tall walls or long uninterrupted runs to reduce joints and install time.

Yes. Gyproc Gypframe studs are designed to support standard plasterboard thicknesses used in interior wall construction (commonly 12.5mm to 15mm). Ensure you select the correct plasterboard size for your wall system and follow manufacturer guidance for fasteners and fixings.

The studs are galvanised steel, offering corrosion resistance and structural support for wall assemblies. They contribute to the overall integrity of interior walls and partitions and are typically used in systems designed to meet building and fire-safety standards when installed as part of a tested Gyproc Gypframe system. Always follow local building codes and installation guidelines.

Keep studs aligned and plumb, use proper fixings to secure to floor and ceiling, and ensure even spacing along the wall. When joining sections, align edges cleanly to prevent misalignment of plasterboard. Use appropriate jointing compounds and corner beads as part of your finishing steps for a smooth surface.

Value comes from a combination of load-carrying capacity, durability, and ease of installation. While I can’t summarize warranty or return policies here, consider the long-term labor savings, system compatibility, and the professional fit when comparing with alternative wall framing options on Fepy.

Comparison 1: Gyproc Gypframe 3000mm Studs - 150x90mm - 3m (current product) vs Gyproc Gypframe 3000mm Studs - 150x90mm - 2m: Shorter length can reduce cut waste for shorter walls; 2m variants may be easier to transport in tight spaces. URL: https://www.fepy.com/product/gyproc-gypframe-3000mm-studs-150x90-2m

Comparison 2: Gyproc Gypframe 3000mm Studs - 150x90mm - 3m (current product) vs Gyproc Gypframe 3000mm Studs - 150x90mm - 4m: A 4m length reduces the number of joints in long runs, potentially speeding up installation and improving wall rigidity, at the cost of longer handling and transport. URL: https://www.fepy.com/product/gyproc-gypframe-3000mm-studs-150x90-4m