Saint-Gobain Gyproc Gyprex E24 Tile, 12MM 1200X600MM, Gypsum Ceiling Tile for Clean Finish & Easy Grid Access - Pack of 8PCS/Box

Gyproc Gyprex E24 Tiles are 12 mm thick gypsum-based decorative tiles designed for interior walls and ceilings. They come in a white finish with a tongue-and-groove interlocking system and are supplied in boxes containing 8 tiles. They’re ideal for quick, affordable updates in residential and light commercial spaces and offer a durable, easy-to-clean surface.

Key specs: thickness 12 mm; 8 tiles per box; tongue-and-groove construction for simple installation; finished in a subtle white; designed for walls and ceilings; water- and impact-resistant construction for a long-lasting surface.

General installation steps: prepare a clean, dry substrate; dry-fit tiles to plan layout; cut tiles as needed with a suitable saw or utility knife; apply an appropriate gypsum tile adhesive or compatible finishing adhesive; fit tiles together using the tongue-and-groove system; press firmly and use spacers if required; once set, finish joints with a compatible jointing compound or finishing plaster and sand smooth before painting or sealing.

Yes. These tiles are designed for both walls and ceilings and are suitable for residential interiors and light commercial applications where a clean, modern finish is desired. They offer a low-maintenance option with a durable surface for interior spaces.

Gyprex E24 tiles are a 12 mm thick option in the Gyprex family, typically offering a slightly sturdier or more substantial profile for surfaces that benefit from extra rigidity. Gyprex E18 tiles (see product page) are a thinner variant. For exact thickness and suitability, compare the two product pages directly: Gyproc Gyprex E24 Tiles (https://fepy.com/product/saint-gobain-gyproc-gyprex-e24-tiles) versus Gyproc Gyprex E18 Tiles (https://fepy.com/product/saint-gobain-gyproc-gyprex-e18-tiles).

Tools and supplies typically needed: measuring tape, pencil or chalk line, utility knife or fine-toothed saw, level or straightedge, compatible gypsum tile adhesive, tongue-and-groove fitting aids (if needed), spacers, jointing compound or finishing plaster, sanding block, cloth for cleaning, and personal protective equipment (gloves, eye protection).

Yes. The durable gypsum surface is easy to wipe clean with a damp cloth. Avoid abrasive cleaners that could scratch or dull the finish. Regular dusting and gentle cleaning help maintain the tile’s appearance.

The tiles are described as water-resistant and suitable for interior use. They perform well in typical living spaces and other dry-to-m moderately damp environments, but they are not designed for constant immersion or prolonged exposure to moisture. Ensure proper ventilation in humid areas.

Yes. The tongue-and-groove design accommodates cutting for edges and corners. Use a suitable saw or a sharp utility knife to trim to fit, taking care to retain the tongue-and-groove alignment on installation.

Each box contains 8 tiles. When planning a project, calculate the total tile area by multiplying the number of tiles by the individual tile area (dimensions are not specified here). Plan for waste and cuts, and consider ordering a spare box for replacements or future maintenance.

For best results, pair these tiles with compatible gypsum jointing compounds, tile adhesives, and finishing plasters. Suggested related items on Fepy include: Gyproc Jointing Compound (https://fepy.com/product/saint-gobain-gyproc-jointing-compound), Gyproc Adhesive (https://fepy.com/product/saint-gobain-gyproc-adhesive), and Gyproc Finishing Plaster (https://fepy.com/product/saint-gobain-gyproc-finishing-plaster).

Tips for a professional finish: lay out tiles to avoid awkward small cuts, verify level and alignment frequently, ensure joints are properly filled with the recommended finishing product, avoid over-tightening joints, allow adequate curing time for adhesives, and lightly sand joints after finishing before painting or sealing.