Gyproc HP Facade Screw - 1000 Pcs/Box

Specifications: material is stainless steel for corrosion resistance, length is 45 mm, box contains 1000 screws, head type is countersunk to sit flush, and they’re intended for timber joints and façade installations on both internal and external structures.

General steps: align the panels, select an appropriate driver bit, drive the screw so the countersunk head sits flush with the surface without over-tightening, and use suitable pilot holes if required for the substrate. Use on timber joints and façade assemblies to ensure secure attachment while minimizing surface disruption.

These screws are designed for exterior and heavy‑duty timber applications. They are stainless steel for enhanced corrosion resistance and feature a countersunk head to provide a seamless finish, making them suitable for façades rather than just interior drywall work.

They’re suitable for drywall and exterior façade structures, including timber frames and internal/external builds. They are intended for professional use where reliable, long‑lasting attachment is needed.

If you’re exploring alternatives on Fepy.com, you might compare these options: Gyproc Timber Screws 50mm 1000pcs (https://fepy.com/product/gyproc-timber-screws-50mm-1000pcs), Gyproc Exterior Screws 60mm 500pcs (https://fepy.com/product/gyproc-exterior-screws-60mm-500pcs), and Gyproc Self-Tapping Screws 40mm 1000pcs (https://fepy.com/product/gyproc-self-tapping-screws-40mm-1000pcs).

For speed and reliability: use the correct driver bit, pre‑drill where recommended by the substrate, drive screws to sit flush with the surface, avoid overtightening to prevent stripping, and follow substrate-specific guidelines to ensure long-term performance.

Each box contains 1000 screws, which is typically well suited for mid‑to‑large façade or timber‑frame projects, reducing the need for frequent reorders during installation.

Wear eye protection and gloves when handling fasteners to avoid injuries from sharp edges. Use appropriate PPE and power tools with proper torque settings to prevent slips or stripping. Keep the work area clean to avoid trips or mishaps.

Store the screws in their original packaging in a dry, cool place. Keep them protected from moisture and humidity to prevent corrosion and rust, especially if exposed to outdoor environments before installation.

Yes, the stainless steel construction and 1000‑piece box offer durability and cost efficiency for larger projects, reducing the frequency of purchases and ensuring consistent supply for ongoing façade work.