Pattex Acrylic Sealant SL100 280ml White Cartridge Crack & Joint Filling

This sealant is ideal for sealing joints between windows, walls, and doors, as well as filling cracks in walls and ceilings. It can handle movement up to 15%, making it versatile for various construction needs.

The sealant forms a skin within approximately 25 minutes at 23°C and 50% relative humidity. Full curing typically takes about 10 days, depending on the joint size and environmental conditions.

Yes, Pattex SL100 can be painted over within one hour of application. This feature allows for seamless integration with surrounding surfaces after sealing.

Pattex SL100 has a very low VOC (Volatile Organic Compound) content, making it an environmentally friendly choice. It is also non-toxic and virtually odourless, enhancing indoor air quality during use.

The sealant should be stored in a cool, dry place away from direct sunlight. It is recommended to keep it at temperatures between 5°C and 40°C for optimal performance.

Yes, this sealant adheres well to damp, absorbent substrates without the need for a primer. However, it’s essential that the surfaces are clean and free from contaminants before application.

While Pattex SL100 is non-toxic, it's advisable to use it in well-ventilated areas. Avoid contact with eyes and skin; if irritation occurs, rinse thoroughly with water.