Henkel Polybit Bituboard Protection Boardm 4mm, Membrane Protection for Backfilling

Henkel Polybit Bituboard Protection Board is a polymer-based protective coating that forms a barrier against moisture, dirt, and other contaminants. It’s designed to be easy to apply and to deliver a long-lasting finish that helps extend the life of treated surfaces. It can be used on multiple substrates including wood, metal, concrete, and plastic.

If you’re seeking durable, long-lasting protection with less frequent maintenance, this coating can offer good value over time. Compare the coverage per liter, number of coats required, and the estimated maintenance interval against other options on Fepy to determine the best overall value for your project.

Inspect the coated surface periodically for wear or peeling. Clean the surface between coats and recoat when you notice wear or loss of gloss. For best results, lightly sand between coats and reapply after surface preparation. Follow recoat intervals based on exposure and wear.

Use it on exterior and interior wooden decks and furniture, metal railings, concrete patios, workshop benches, and other high-traffic or moisture-exposed surfaces. It’s well-suited for areas prone to staining, weathering, or water exposure.

Compared with the Henkel Polybit Bituboard Guard Coat (https://fepy.com/product/henkel-polybit-bituboard-guard-coat), Bituboard Protection Board focuses on forming a moisture and dirt barrier with strong UV resistance. Compared with Polybit Multi-Surface Protective Sealant (https://fepy.com/product/polybit-multi-surface-protective-sealant), Protection Board offers targeted protection for a wider range of substrates with a more durable film. Compared with Bituboard Surface Sealer (https://fepy.com/product/bituboard-surface-sealer), it provides a robust protective film rather than a penetrative seal. Review the feature notes and choose based on substrate, exposure, and maintenance needs.

Key attributes include moisture and dirt resistance, UV stability, and a durable, uniform finish across wood, metal, concrete, and plastic. It uses polymer-based additives to enhance durability and longevity and is designed to reduce frequent maintenance compared to untreated surfaces.

Work in a well-ventilated area and wear gloves and eye protection. Avoid skin contact and inhalation of fumes. Keep away from heat sources and store the product upright in a cool, dry place, away from children and pets.

Drying and curing times depend on temperature and humidity, but you should allow the surface to become tack-free before applying a second coat and full cure may take up to a day or more. The finish is designed to be long-lasting, offering resistance to UV, moisture, and everyday wear to reduce maintenance.

Prepare the surface by cleaning and drying it thoroughly. Stir the product well and test on a small area first. Apply thin, even coats with a brush, roller, or spray. Allow each coat to dry per the label recommendations and lightly sand between coats if required. Typically two coats provide best results, then let the final coat cure before putting the surface into service.

The coating forms a durable barrier that minimizes water absorption and dirt penetration. It’s formulated to resist fading and cracking under UV exposure, helping to keep the surface looking newer for longer and reducing staining from common contaminants.

It’s suitable for wood, metal, concrete, and plastic surfaces. For best results, make sure the surface is clean, dry, and free of loose particles before coating.

It is suitable for concrete admixtures, waterproofing, repair and rehabilitation, surface treatments, adhesives, tile grouts, flooring compounds, and fire protection.

Yes, the integrated thermal insulation layer helps maintain indoor warmth and comfort.

The board measures 10m x 1m x 4mm, providing sufficient coverage for various applications.

Yes, it is lightweight and comes with pre-drilled holes for easy installation on walls and roofs.