Henkel Polybit Bitutape TS, 10M X 100mm X 1.5mm, Adhesive Bitumen Sealing Tape

Polybit Bitutape TS is a self-adhesive, cold-applied bitumen tape designed for waterproofing and sealing. It creates a waterproof membrane that adheres to various substrates to protect roofs, decks, foundations, gutters, and other surfaces from water intrusion.

The tape bonds directly to prepared surfaces without heat or flames. Its special bitumen formulation provides a waterproof seal, while its self-adhesive layer ensures a strong, durable bond even in exposed conditions.

Key specs include: self-adhesive, cold-applied waterproofing membrane; bitumen-based compound; impermeable to water; UV-resistant; abrasion-resistant; flexible to accommodate surface irregularities; suitable for both flat and sloped surfaces across various climates.

Ideal for roofing, gutters, decks, foundations, balconies, and other waterproofing/sealing needs where a durable, cold-applied membrane is advantageous.

General installation steps: 1) Clean and dry the substrate thoroughly. 2) If needed, repair any surface defects and ensure a smooth profile. 3) Unroll the tape and align it over the area to be sealed. 4) Remove the release liner gradually while pressing the tape firmly onto the surface. 5) Overlap joints by recommended amounts and apply consistent pressure to ensure full adhesion. 6) After installation, inspect seams for a uniform seal and address any air pockets. Always follow manufacturer guidelines for surface prep and overlaps.

Polybit Bitutape TS is designed for cold-applied use and can perform across a range of climates. For best results, apply within the recommended temperature range specified by the manufacturer and avoid installations in extreme freezing conditions or during rain.

The product is intended for outdoor and building-envelope use. Safety considerations include handling with proper PPE, avoiding prolonged skin contact with bitumen, and ensuring adequate ventilation when cutting or heating is involved. Store and use the tape as directed by the supplier.

Compared to similar bitumen tapes on Fepy.com, Polybit Bitutape TS offers self-adhesive, cold-applied waterproofing with good UV and environmental resistance. For an at-a-glance comparison, you can view the following alternative options on Fepy: Polybit Bitutape ST Adhesive Bitumen Tape (https://fepy.com/product/polybit-bitutape-st-adhesive-bitumen-tape) and Bitumen Tape Waterproofing 1mm (https://fepy.com/product/bitumen-tape-waterproofing-1mm). These provide similar waterproofing capabilities with varying thickness, adhesion, and flexibility to suit different substrate conditions.

Use cases include sealing roof penetrations and joints, flashing around edges, sealing gutters and connections, waterproofing deck perimeters, and sealing foundation wall interfaces where a flexible, self-adhesive bitumen solution is advantageous.

Cut the tape to length with a sharp utility blade, avoiding jagged edges. Handle with clean hands or gloves to prevent transfer of oils. Store in a cool, dry place away from direct sunlight and heat sources to maintain tack and adhesiveness.

Polybit Bitutape TS adheres well to common construction substrates like concrete, metal, wood, and asphalt. For best results, ensure the surface is clean, dry, and free of loose particles, oils, or contaminants that could impede adhesion. If unsure about a specific substrate, perform a small test seam first.

When evaluating value, consider the tape’s durability, weather resistance, and the potential savings from a cold-applied, fast-installation solution. For return specifics, refer to Fepy’s return guidelines on product returns (ensure you check the site’s stated terms for eligibility and time frames).

For quick comparisons, you can explore similar waterproofing tapes on Fepy such as Polybit Bitutape ST Adhesive Bitumen Tape at https://fepy.com/product/polybit-bitutape-st-adhesive-bitumen-tape and Bitumen Tape Waterproofing 1mm at https://fepy.com/product/bitumen-tape-waterproofing-1mm to assess differences in thickness, adhesion, and flexibility.