Jaquar Continental Wall-Mounted Single Lever Bath & Shower Mixer – Chrome

Key specs: flow rate of 25.51 LPM at 3 bar; wall-mounted design; brass body with chrome plating; NSF-61 approved cartridge with a temperature limiter; and an expected component life of up to 70,000 cycles. This combination supports reliable performance and long-lasting shine.

NSF-61 approval indicates the cartridge meets safety standards for drinking water quality. The built-in temperature limiter helps prevent scalding by restricting the maximum water temperature, adding a safety layer for households, especially where children or elderly users are present.

Typical installation steps: 1) shut off the mains supply and drain lines. 2) mount the mixer to the wall at a suitable height and secure it. 3) connect hot and cold water inlets. 4) attach the shower outlet and any required hoses or fittings. 5) test for leaks, adjust the temperature limiter if needed, and ensure smooth lever operation.

Clean with a soft cloth and mild soap solution. Avoid abrasive cleaners, scrubbers, or acidic/bleach-based cleaners that can dull the chrome. Regular wiping helps prevent water spots and mineral buildup; if hard water is present, use a gentle descaler recommended for chrome finishes and rinse thoroughly.

Safety features include the NSF-61 approved cartridge and a temperature limiter that prevents scalding. The solid brass body with chrome plating also ensures durability and a robust, safe fixture suitable for domestic bathroom use.

It's ideal for modern, space-saving bathrooms where a clean wall-mounted look is desired. The strong 3-bar flow makes showers feel refreshing, while the single-lever control simplifies operation. It’s suitable for retrofit installations or new builds aiming for a premium chrome finish and durable performance.

Yes, it is designed to work with standard shower outlets and hoses used in typical bath/shower setups. When selecting hoses or heads, ensure compatibility with the mixer’s outlets and verify hot/cold supply alignment, as well as any regional piping standards (e.g., 15 mm in some regions).

The COP-CHR-119PM emphasizes a strong 25.51 LPM flow at 3 bar and NSF-61 approved cartridge with a temperature limiter. For quick comparisons on Fepy, you can review these similar Jaquar wall-mounted options: 1) Jaquar COP-CHR-125PM Wall Mounted Bath & Shower Mixer Chrome: https://fepy.com/product/jaquar-cop-125pm-wall-mounted-bath-shower-mixer-chrome 2) Jaquar COP-CHR-118PM Wall Mounted Bath & Shower Mixer Chrome: https://fepy.com/product/jaquar-cop-118pm-wall-mounted-bath-shower-mixer-chrome

You’ll typically need: adjustable wrench, plumber’s tape (PTFE tape), screwdriver, a sealant or plumber’s putty for the wall escutcheon, and appropriate hoses/fittings compatible with your in-wall plumbing. Have the hot and cold supply lines ready, and refer to the product’s installation guidelines for any model-specific requirements.

If you’re after a durable, chrome-finished, wall-mounted mixer with a proven 25.51 LPM flow at 3 bar and NSF-61 safety features, this model is well-suited for contemporary bathrooms where space-saving and a premium look are priorities. Its temperature limiter also adds safety for households with kids or elderly users.