Jaquar Click Clack Slotted Basin Waste

The unit is made from high‑quality brass and finished with nickel and chromium plating. The finish is validated for salt spray and adhesion to ensure long‑lasting corrosion resistance in bathroom environments. It is available in multiple color/finish options.

Yes. It is designed to fit most standard basins. If you’re unsure, verify compatibility by checking the basin waste size and thread type against your basin opening and fittings. The slotted design also helps with efficient drainage and clog prevention.

Jaquar offers this basin waste in multiple color/finish options. The base finish is chrome with nickel accents, and other finishes may be available depending on the Jaquar range you choose.

The slots allow water to drain smoothly while preventing hair and larger debris from entering the drainage system, reducing the chance of blockages. It also simplifies cleaning around the drain area.

Typical steps: 1) Turn off water supply and remove the existing waste. 2) Clean the basin hole and threads. 3) Apply plumber’s tape or sealant to the threads. 4) Screw in the Click Clack waste and tighten. 5) Apply a bead of silicone sealant around the base if needed and smooth. 6) Turn the water back on and test for leaks.

Regularly clear hair and debris from the slotted opening. Clean with mild soap and water; avoid abrasive cleaners or scouring pads that could scratch the chrome finish. Wipe dry to prevent water spots and corrosion over time.

Yes. The brass construction with nickel–chromium plating provides durability and corrosion resistance. The finish is validated for salt spray and adhesion, making it suitable for use in typical bathroom settings.

In most cases, yes. It is designed to fit standard basin openings and fittings. Ensure the thread size and seal type match your basin. You may need to replace the gasket or seal for a proper, leak-free fit.

Comparable options available on Fepy include: 1) Jaquar Slotted Basin Waste – Chrome Finish (https://fepy.com/jaquar-slotted-basin-waste-chrome-finish) — similar slotted design with chrome finish for a cohesive look. 2) Jaquar Pop-Up Basin Waste (https://fepy.com/jaquar-pop-up-basin-waste) — different mechanism (pop-up) but same purpose of drainage and debris protection. 3) Hindware Slotted Basin Waste (https://fepy.com/hindware-slotted-basin-waste) — another brand option with a slotted design. Each option offers different finishes and maintenance considerations, so choose based on finish, mechanism, and compatibility with your basin.

Ideal for modern or contemporary bathrooms, especially where a sleek chrome/nickel finish is desired. It suits residential homes, guest bathrooms, and any vanity setup that benefits from a durable brass construction and easy-clean slotted drain.

Check that the threads are fully tightened and that the gasket/seal is properly seated. If needed, reseal with plumber’s tape or silicone around the base. Run water and observe for any dripping around the waste and base to ensure a proper seal.