JECH JE1058 Body Safety Harness 45mm Width, D-ring with 2 webbing loop, Green/Black

Key specs include 45 mm polyester webbing, a minimum breaking strength of 25 kN, EN361 compliance, a dorsal attachment D-ring, two front webbing loops, a high resistance polyethylene back plate, adjustable chest and thigh straps, a sit strap, a PE buckle on the chest strap, and padded chest area for comfort.

To wear it properly, slide the harness on, position the dorsal D-ring between the shoulders, tighten the thigh straps first, then adjust the chest strap, and finally secure and adjust the sit strap for comfort. Ensure there are no twists in the webbing, all buckles are fastened, and the D-ring remains clearly accessible on your back. Connect any lanyards or connectors only after you’ve confirmed a snug, secure fit.

The JE1058 is suitable for fall arrest and positioning tasks. It is commonly used in construction, maintenance, rope access, and any high work environment where workers are exposed to heights and potential falls.

The harness meets EN361, which defines performance and testing requirements for full body fall arrest harnesses. It has a minimum breaking strength of 25 kN and features a dorsal D-ring plus two front webbing loops, which are design elements intended to support safe fall arrest and secure positioning when used with compatible lanyards and connectors.

If you’re considering alternatives on Fepy, you can compare similar full body harnesses such as the JECH JE1050 full body safety harness and the Greensafe EN361 full body harness. See JECH JE1050 at https://fepy.com/jech-je1050-full-body-safety-harness and Greensafe EN361 full body harness at https://fepy.com/greensafe-en361-full-body-harness. For a broader view, you can also browse the safety harness collection at https://fepy.com/collections/safety-harnesses.

Yes. Before use, inspect all webbing, buckles, and stitching for wear or damage. Put on leg straps first, then chest strap, adjust all straps to fit snugly without restricting movement, ensure the back D-ring sits in the correct position, and never twist the webbing. When using with fall protection lanyards, connect only to the dorsal D-ring and follow proper fall protection procedures as trained for your site.

Care guidelines: inspect after each use and retire if you notice significant wear, fraying, or damage. Clean with mild soap and water, air dry away from direct heat or sunlight, and store in a cool, dry place away from chemicals. Do not machine wash or expose to high heat to avoid weakening the webbing.

Yes. The JE1058 features adjustable chest and thigh straps plus a sit strap, allowing a broad range of body sizes and comfortable wear for extended periods. Proper adjustment is essential for maximum protection and mobility.

If you detect wear, fraying, torn stitching, or any loss of integrity, discontinue use immediately. Do not attempt repairs yourself; replace the harness or consult the supplier for guidance. Always retire a compromised harness from service.

If the harness doesn’t meet your needs, you can pursue a return or exchange according to Fepy’s returns policy. Contact the seller or check Fepy’s returns guidance for eligible items, timeframes, and conditions to ensure a smooth process.

The 45 mm webbing width is a standard size that balances comfort and strength, and it is designed to be compatible with most compatible lanyards, connectors, and buckles used with EN361 harnesses. Ensure that all connectors are rated for fall arrest and compatible with the D-ring and webbing width you are using.