JECH SRL-3 Self Retractable Fall Arrester, working length 3m , Capacity 100Kg

Working length: 3 meters; Maximum arrest distance: 54 inches (about 1.37 meters); Webbing: 20 mm Dyneema; Material: ABS housing; Max arresting force: up to 6 kN; Capacity: 100 kg; Non-arresting load: up to 5 kg; Hook: aluminum rotatable; Safety feature: sewn-in fall indicator.

The 6 kN maximum arrest force indicates the peak load the device is engineered to limit against the wearer during a fall. This helps minimize injury by limiting the force transmitted through the lanyard to the worker’s body.

The device is designed to safely support up to 5 kg when it is not actively arresting a fall. This means that during normal use (no fall), the weight placed on the lanyard should stay within this limit to maintain safe operation.

Before use: inspect the device for any damage to the ABS housing, webbing, hook, and fall indicator. Attach the lanyard’s aluminum rotatable hook to your harness’ D-ring, and connect the other end to a compatible anchor point that meets your site requirements. Ensure the rope retracts smoothly, avoid sharp edges or entanglement, and keep a clear path for movement. During use: maintain control of the lanyard, avoid free-falling hazards, and never anchor to unstable structures. After use: store in a clean, dry place away from direct heat or chemicals.

Perform a pre-use inspection every day: check webbing for cuts, fraying, or UV damage; examine the ABS housing for cracks; verify the fall indicator is present and readable; ensure the hook rotates freely and latches securely. Clean with mild soap and water if needed, and dry completely before storage. Replace the device if any damage is found or after a fall event you suspect compromised performance.

This SRL is well-suited for tasks that require movement at height with a secured anchor point, such as roofing, construction, maintenance work, electrical installations, and other overhead or elevated operations where a controlled arrest distance and reduced fall impact are important.

Key safety features include an internal shock absorber to reduce fall impact, a sewn-in fall indicator to show if the device has deployed, an aluminum rotatable hook for secure attachment, and 20 mm Dyneema webbing for strength and light weight. The ABS housing adds durability in challenging work environments.

Compared to other Fepy options, the JECH SRL-3 offers a 3 m working length with a 54-inch arrest distance and 6 kN arrest force, using Dyneema webbing in a lightweight ABS housing. For shorter or longer reach, you might consider: JECH SRL-2 Self Retractable Fall Arrester (2 m) and JECH SRL-4 Self Retractable Fall Arrester (4 m). See the product pages for exact specs and compatibility: https://fepy.com/product/jech-srl-2-self-retractable-fall-arrester-2m-100kg and https://fepy.com/product/jech-srl-4-self-retractable-fall-arrester-4m-100kg.

A 3-meter working length provides a balance between reach and freedom of movement, allowing users to perform tasks at typical heights without excessive slack. If your work area requires more distance from the anchor point, a longer SRL might be preferable; for closer work, a shorter SRL could reduce tangling and snag hazards.

ABS housing offers rugged durability and impact resistance, helping protect internal components in tough job sites. Dyneema webbing provides high tensile strength with lighter weight and reduced bulk, improving comfort and ease of movement while maintaining safety margins.

Store in a clean, dry area away from direct sunlight, heat, chemicals, and sharp objects. Regularly clean off dirt or debris, inspect before each use, and avoid exposing the device to conditions that could degrade the webbing or housing. Do not store in a twisted or compressed state; allow it to retract naturally when possible.