|Quantity Unit :||1 Piece|
|Item Type :||Fenomastic|
|Application Type :||Interior|
About this item
Superior grade emulsion paint JOTUN 18L FENOMASTIC PURE COLOUR EMULSION is made for interior surfaces. constructed using a unique acrylic copolymer emulsion.
You can easily purchase JOTUN 18L FENOMASTIC PURE COLOUR EMULSION online from Fepy at the best affordable price; we also supply it in all parts of the UAE.
Possesses good flow, concealing ability, anti-bacterial, and color-retention properties from the Incas. provides a matt, smooth, washable finish. APEO, formaldehyde, heavy metals, and other hazardous compounds are absent. has a very low VOC content, ensuring healthy indoor air.
Perfect for enhancing and safeguarding interior surfaces.
Cement plaster, concrete, block work, rendered surfaces, gypsum board etc.
Packaging size: 18L.
Solids by volume: 35 ± 2 volume%.
Specific gravity: 1.57.
VOC: 16 g/l.
The item can be used in:
Spray: Use either conventional or airless spray.
It is advised to use a brush to paint corners and edges.
CLEANING OF PAINTING TOOLS:
Film thickness per coat.
Typical recommended range:
Dry film thickness 30 - 55 µm.
Wet film thickness 85 - 157 µm.
Theoretical spreading rate 11.67 - 6.4 m²/l.
Dilution: Maximum 10 %.
CONDITIONS DURING APPLICATION:
When measured close to the substrate, the temperature should be at least 10 °C and at least 3 °C above the air's dew point. In small spaces, adequate airflow is typically needed to ensure proper drying.
1.The recommended information is for repainting with the same type of general-purpose paint.
2. If more than one coat is applied, the number, order, and total thickness of the prior applications applied will all affect drying timeframes.
3. Prior to applying the next layer, the surface needs to be dry and clear of any contaminants.
The drying duration is measured by stated values:
Relative Humidity (RH) 50 %
Substrate temperature: 10 °C 23 °C 40 °C.
Surface (touch) dry: 12 h 6 h 2h.
Hard dry: 16 h 8 h 4 h.
Dry to over coat, minimum: 12 h 6 h 2 h.
Recommended paint system.
Fenomastic Emulsion Primer or PVA Primer 1 Coat.
Filler: Stucco 2 Coats.
Fenomastic Pure Colours Emulsion Matt 2 Coats.
The storage of FENOMASTIC PURE COLOR EMULSION must be stored as per the national regulations. Keep the containers away from sources of heat and ignite in a dry, cold, well-ventilated area. Containers must always be kept shut. Handle carefully.
|Quantity Unit||1 Piece|
|Compatibility||Cement Plaster, Concrete, Block Work, Rendered Surfaces, Gypsum Board|
Arrives: Sep 30