Jotun 18L Texo Compound - White

Benefits of using Jotun Texo Compound include ease of application with a roller, brush, or spray; a solid protective finish with excellent flexibility; suitability for various substrates; ideal for large areas due to superior coverage; and a clean, versatile white color.

Jotun Texo Compound is available on FEPY, the UAE's leading e-commerce site for construction materials and tools.

The compound can be used on various surfaces, including cement plaster, concrete, brickwork, rendered surfaces, wood, and metal.

The surface must be clean, dry, and free from dust, oil, grease, laitance, and release or curing agents. A light sanding is recommended for good adhesion.

While Jotun Texo Compound can fill minor imperfections, it is not recommended for large cracks. Proper crack repair should be done before applying the compound for larger cracks.

Suitable application methods for this product include using a roller (recommended for larger areas), brush (for corners and edges), or spray.

An 18L container of Jotun Texo Compound could cover between 162 and 117 square meters, depending on application thickness, surface texture, and porosity. It’s best to account for overage and ensure enough product is available.

Always refer to the instructions on the product container and the Safety Data Sheet (SDS) for detailed health and safety precautions.

Jotun Texo Compound is an exterior emulsion intermediate coat based on acrylic copolymer emulsion. It is specially formulated to provide textured surfaces and cover minor undulations. It is ideal for the Acrylic Texotile System and can also be used on both exterior and interior surfaces to fill minor imperfections.

Jotun Texo Compound can be applied to various substrates including cement plaster, concrete, block work, and rendered surfaces. The substrate should have sufficient strength to receive the paint and be free from defects like cracks or pinholes.

Jotun Texo Compound has a specific gravity of 1.8 and solids by volume of 62 ± 2%. It is VOC-free (0 g/l) according to ISO 1189014. The product is environmentally friendly and non-toxic.

Jotun Texo Compound can be applied using a spray method with a gravity feed hopper gun or other suitable equipment. It can also be applied with a roller or brush for certain applications.

The recommended dry film thickness ranges from 100 to 2000 μm, while the wet film thickness ranges from 160 to 3225 μm. The theoretical spreading rate varies from 6.2 to 0.3 m²/l, depending on the application conditions.

Drying times vary based on temperature and humidity. At 10°C, the surface is touch dry in 20 hours, while at 40°C, it takes 6 hours. Hard drying takes 14 days at 10°C and 4 days at 40°C.