Jotun 20L Road Marking - Grey

This road marking paint has a solid content of 37 ± 2% by volume, a specific gravity of 1.2, and a VOC level of 584 g/l. It is available in grey and comes in a 20-liter packaging size.

The recommended application methods include using a roller or spray (either airless or conventional). A brush can be used for corners and edges. For airless spray, a nozzle tip size of 0.018 to 0.021 inches is advised, with a spray angle of 65 to 80 degrees.

Drying times vary based on substrate temperature. For instance, at 10 °C it takes about 20 minutes to become touch dry, while at 23 °C it takes approximately 10 minutes. The minimum time to overcoat is around 120 minutes at lower temperatures and can be as short as 30 minutes at higher temperatures.

The substrate temperature should be at least 10 °C and at least 3 °C above the dew point. Additionally, the surface must be clean, dry, and free from contaminants prior to application.

It should be stored in a cool, dry place away from heat sources and direct sunlight. Containers must remain tightly closed when not in use to maintain product integrity.

Users should handle the paint with care and ensure proper ventilation during application. It is advisable to wear protective equipment such as gloves and masks to avoid inhalation or skin contact with the paint.

Jotun Road Marking is a professional road marking service listed on Fepy.com. The service includes expert staff handling detection, measurements, installation, and ongoing maintenance. It uses high-tech equipment and offers creative colour combinations to produce long-lasting, flexible markings that prioritize maximum safety for drivers and pedestrians.

The service uses adaptable, versatile materials with a wide range of colour options and combinations. This allows for customized designs to match project goals and branding while ensuring visibility and safety.

It can be applied to common road surfaces such as asphalt and concrete, with the team adjusting materials and methods to suit surface condition and project requirements.

The workflow usually involves site assessment and measurements, design planning with color choices, material selection, installation, and follow-up maintenance. All steps are performed by trained professionals following strict safety procedures.

The markings are designed to be long-lasting, with durability influenced by traffic volume, weather conditions, and maintenance. Proper upkeep and timely re-marking help extend their life.

Yes. The service adheres to high safety standards and government requirements. All applications are carried out by experts following safety procedures to protect drivers and pedestrians.

Jotun Road Marking focuses on a flexible, customizable service with long-lasting results, while Thermoplastic Road Marking is a material-based option with its own installation profile. For a direct product comparison, see: https://fepy.com/product/thermoplastic-road-marking

Road Marking Paint is another material option with different durability and application characteristics. For a direct comparison, see: https://fepy.com/product/road-marking-paint