Jotun Road Marking Paint, White, 20 L, Quick-Dry, High Visibility

Jotun Road Marking White has a solids content of 70% by volume, a density of 1.6 kg/L, and a theoretical spreading rate of 4-6 m²/L. It has a drying time of 30 minutes to touch and 2 hours to through. The product is available in 20L containers.

Jotun Road Marking White should be applied using airless spray equipment. The surface must be clean, dry, and contaminant-free before application. Proper surface preparation and application techniques are crucial for optimal performance.

Jotun Road Marking White offers excellent adhesion, colour retention, and reflectivity. It is resistant to weathering, abrasion, and chemical exposure, ensuring long-lasting road visibility and durability.

Jotun Road Marking White should be applied in dry conditions with a minimum surface and air temperature of 10°C. The relative humidity should be below 80%. Avoid application in direct sunlight or strong wind.

Jotun Road Marking White is a solvent-based product, so proper personal protective equipment (PPE) such as gloves, goggles, and respiratory protection should be used during application. Ensure adequate ventilation and follow all safety instructions on the product label and safety data sheet.

Jotun Road Marking White should be stored in a dry, well-ventilated area away from direct sunlight and heat sources. The containers should be kept tightly closed when not in use. Avoid skin and eye contact, and wash hands thoroughly after handling.

It is ideal for marking roads, kerbs, speed bumps, and other low-traffic areas on asphalt and concrete surfaces. The paint is UV-resistant and suitable for outdoor applications.

The solids by volume are 37 ± 2%, the specific gravity is 1.2, and the VOC content is 584 g/l. It provides a dry film thickness of 40–80 µm and a wet film thickness of 110–210 µm per coat.

The paint can be applied using a roller (recommended), airless or conventional spray, and a brush for corners and edges. For airless spray, a nozzle tip of 0.018–0.021 inches is suggested.

At 23°C, it becomes surface dry in 10 minutes, hard dry in 30 minutes, and ready for overcoating in 60 minutes. Drying times vary with temperature.

The theoretical spreading rate ranges from 9.25 to 4.5 m²/l, depending on the film thickness applied and surface conditions.

It is designed for roads and kerbs made of asphalt or concrete, providing excellent adhesion and durability in outdoor environments.

The paint contains VOCs at 584 g/l, so proper ventilation during application is necessary. It meets ISO standards but should be handled with care due to its solvent-based formulation.

The paint offers good resistance to abrasion, impact, and weathering, making it suitable for areas with light vehicular traffic or pedestrian use.