KDK Industrial Ventilation Fan 14" High Pressure Metal 1736 CFM 230V Without Shutter 35GSE

KDK Industrial Ventilation Fan 14" High Pressure Metal 1736 CFM 230V Without Shutter 35GSE

The KDK 35GSE is a 14 inch industrial ventilation fan from the High Pressure Series for large air change in factories, warehouses and commercial kitchens. It moves 2,950 m3/h (1,736 CFM) on a 220 to 240V 50Hz single phase supply, using 118W at 230V with a noise level of 51 dB(A). The bell mouth and wave shaped, S-section blade keep airflow strong against duct and wind resistance, while the powder coated metal body gives a durable, rust resistant finish.

• High Pressure Series: newly developed fan and original bell mouth construction run against high static pressure with low power consumption

• Wave shaped blade with a 3-dimensional S-shaped cross section, developed with hydrodynamic analysis, for smooth, turbulence free airflow and low noise

• Pressure is spread evenly over the blade surface for high durability in continuous duty

• Special polyester resin and powder coated metal body for a highly rust resistant finish

• High performance single phase motor with thermal cut-off

• Reversible airflow, exhaust or intake, by adjusting the wiring and blade

• Installs horizontally or vertically; ambient temperature range -10 to +40°C

• Supplied without shutter; matching KDK shutter available as an option

Brand

KDK

Model

35GSE

Series

Industrial Type Ventilation Fan, High Pressure Series

Fan size

14 inch, Ø350 mm blade

Phase

Single phase

Air volume

2,950 m3/h, 1,736 CFM at 220, 230 and 240V 50Hz; 3,380 m3/h, 1,989 CFM at 220V 60Hz

Power consumption

113W at 220V 50Hz; 118W at 230V 50Hz; 122W at 240V 50Hz

Speed

1,430 rpm at 220V; 1,435 rpm at 230V; 1,440 rpm at 240V (50Hz)

Noise level

51 dB(A) at 220, 230 and 240V 50Hz

Frame size

467 x 467 mm, mounting hole pitch 434 mm, Ø12 mm holes

Depth

236 mm

Weight

10.5 kg

Motor

High performance motor with thermal cut-off

Finish

Polyester resin, powder coated metal

Shutter

Not included, optional

Ambient temperature

-10 to +40°C

How to Use

Mount the fan in a wall opening or on a frame sized for the fan, fixing it through the four mounting holes with bolts suitable for the wall or steel structure. Have a qualified electrician connect it to a single phase 220 to 240V 50Hz supply through a switch and isolator; for intake instead of exhaust, have the wiring and blade reversed as per the KDK instructions. Fit a guard or the optional KDK shutter where the opening is within reach or exposed to wind and rain. Isolate the power before cleaning the blade and frame, and inspect fixings periodically.

Applications

Large air change and fume, heat and smoke extraction in factories, warehouses, workshops, garages, commercial kitchens, shops, plant rooms, car parks and farms, including installations connected to ducting where the static pressure is relatively high.