Kiswel 2.5mm Welding Rod 7018 - Per Ctn

Diameter: 2.5 mm; Tensile strength: 690 MPa; low hydrogen content; high cellulose binder; easy slag removal; high deposition rate; suitable for mild to medium carbon steels; packaging: per carton.

Prepare clean base metal, remove rust and moisture, and ensure stored rods are dry. Use a stable arc with appropriate polarity (DC+ is commonly recommended for 7018). Maintain a suitable arc length, work in clean weld zones, deposit evenly, and remove slag after each pass. Store rods in a dry environment when not in use.

This 2.5mm 7018 electrode is suitable for a variety of joint configurations, including butt and fillet welds, and can perform well in both shallow and deeper welds. It supports welding in multiple positions depending on base metal thickness and setup.

Keep the rods in a dry environment, ideally in a rod oven or sealed desiccant environment to prevent moisture uptake. Store in their original packaging until use, and ensure the carton remains dry to prevent hydrogen embrittlement or moisture-related defects.

Wear appropriate PPE (helmet, gloves, eye protection, and flame-resistant clothing). Ensure proper ventilation or fume extraction. Handle rods with clean, dry hands to avoid moisture transfer. Follow standard welding safety practices for live electrical equipment and hot weld zones.

On Fepy you can compare Kiswel 7018 2.5mm with alternatives such as Lincoln Electric 7018 2.5mm and ESAB 7018 2.5mm, which are also available on the site. For reference, example product pages include: Lincoln Electric 7018 2.5mm: https://fepy.com/product/lincoln-electric-7018-2-5mm-welding-rod-per-ctn and ESAB 7018 2.5mm: https://fepy.com/product/esab-7018-2-5mm-welding-rod-per-ctn. Kiswel 7018 3.2mm is another option: https://fepy.com/product/kiswel-7018-3-2mm-welding-rod-per-ctn. These options help you balance deposition, slag removal, and fit for your project needs.

Ideal for welds on mild and medium-carbon steels in repair work, general construction, automotive, and structural fabrication. It provides good deposition and crack-free welds, suitable for both shallow and deeper weld profiles.

If you’re welding mild to medium-carbon steels, this 2.5mm 7018 is a good fit. Check your base metal specification and welding requirements (strength, toughness, and hydrogen controls). If uncertain, compare the base metal grades and consult the product details on Fepy or reach out for guidance.

The rods are sold per carton (Per Ctn). Packaging is designed to maintain low moisture and hydrogen content, supporting stable storage and reliable performance once opened and used.

Keep rods dry and properly stored, ensure a clean work area, use the recommended polarity and arc length for 7018, deposit with even travel speed, keep a steady hand to maintain consistent welds, and slag off after each pass. Using a rod oven for longer storage and preheating only if required by joint design can also help.

Buying in carton quantities (Per Ctn) typically provides a favorable unit price and consistent supply. When evaluating value, compare the unit cost per electrode and the deposition quality, considering factors like hydrogen control, slag removal, and suitability for your steel grade. You can also review alternative 7018 rods on Fepy (such as Lincoln Electric and ESAB options) to determine the best balance of price and performance.