Kiswel 2.6MM Welding Rod 6013 - Per Pkt

Low-hydrogen coating reduces the risk of hydrogen-induced cracking in the weld, helping deliver more consistent, crack-resistant welds and improved long-term reliability especially on certain structural or automotive components.

Yes. The rod is specified as AC-DC capable, so you can use it with either type of power source depending on your equipment and welding setup.

It is designed for low to medium carbon steels and is well-suited for general welding tasks on thin to moderate-thickness joints commonly found in construction, automotive repair, and equipment fabrication.

This rod is intended for gas shielded arc welding (GMAW), a common MIG welding process that uses a shielding gas to protect the weld pool.

Common shielding gases for 6013 in GMAW include mixtures like 75% Argon/25% CO2 (often referred to as C25) or other CO2-containing mixes, depending on the material and joint requirements. Always follow standard practice for your setup.

Use standard GMAW settings appropriate for a 2.6mm 6013 electrode and your base material. Start at a mid-range amperage and adjust to achieve a stable arc, good penetration, and clean bead appearance. Maintain a steady travel speed and keep the heat input consistent.

Clean the joint thoroughly: remove rust, oil, grease, and any paint. Ensure the surface is dry and free of contamination. For best results on carbon steels, fit-up should be tight with a clean, dry surface for an even weld bead.

Store in a dry, sealed environment to prevent moisture absorption. If rods become exposed to humidity or moisture, dry them according to standard welding rod drying guidelines before use to avoid hydrogen-related defects.

Wear appropriate PPE: welding helmet with proper shade, flame-resistant clothing, gloves, and safety boots. Work in a well-ventilated area to manage fumes, and follow shop safety procedures to protect eyes, skin, and lungs from radiant heat and sparks.

Comparing variants helps match to your material and thickness: Kiswel 6013 2.0mm is typically favored for thinner joints and fine welds, Kiswel 7018 2.6mm offers a different weld appearance and mechanical properties, and Kiswel 6013 3.2mm is aimed at thicker joints. See the alternatives on Fepy for exact specifications and to choose the best fit for your project.

Yes. Its general-purpose design, AC/DC capability, and low-hydrogen coating make it a versatile choice for hobbyists who do maintenance and light fabrication as well as professionals working on standard structural or automotive welding tasks.

Alternative Kiswel options on Fepy include Kiswel 6013 2.0mm (https://fepy.com/product/kiswel-6013-2-0mm-welding-rod-per-pkt), Kiswel 6013 3.2mm (https://fepy.com/product/kiswel-6013-3-2mm-welding-rod-per-pkt), and Kiswel 7018 2.6mm (https://fepy.com/product/kiswel-7018-2-6mm-welding-rod-per-pkt). These pages provide detailed specs to help you compare performance and suitability for your joint requirements.