Knauf Regular (RG) 12.5mm Gypsum Board 1200x2400mm

The weight of the Knauf Regular Board is approximately 9 to 9.5 kg per square meter. This lightweight design facilitates easier handling and installation.

The Knauf Regular Board is suitable for interior applications such as suspended ceilings, partition walls, wall claddings, and drywall linings. It is ideal for general construction without special requirements.

The Knauf Regular Board has a fire reaction class of A2-s1,d0, indicating good fire resistance. This makes it a safe choice for various building environments.

The boards should be stored on pallets in a dry environment to prevent damage. If stored outside, they must be covered to protect against moisture and other environmental factors.

The board has a dry bending radius of at least 2750 mm and a wet bending radius of at least 1000 mm. This flexibility allows for various design applications without compromising structural integrity.

Installation should follow applicable standards, such as TS 1475, and adhere to Knauf's technical brochures relevant to the drywall system being used. Proper installation ensures optimal performance and durability.

Knauf Regular Board is a gypsum-based wallboard with dimensions of 1200 x 2400 x 12.5 mm. It features a smooth surface and is designed for various interior applications, including partition walls and suspended ceilings.

The boards should be stored on pallets in a dry environment to prevent damage. If stored outside, they must be covered to protect them from moisture and other environmental factors.

Knauf Regular Board is suitable for a variety of interior works, including suspended ceilings, partition walls, wall claddings, and drywall linings. It is designed for general use without special requirements.

The weight of the Knauf Regular Board is approximately 9 to 9.5 kg/m². This lightweight nature makes handling and installing in various construction projects easier.

The dimensional tolerances for the Knauf Regular Board are as follows: length tolerance is ±5 mm, width tolerance is ±4 mm, and thickness tolerance is ±0.5 mm. These tolerances ensure consistent quality during installation.

While the standard Knauf Regular Board is not specifically moisture-resistant, there are variants like the Knauf Moisture Resistant Board designed for areas exposed to higher humidity levels. Always check product specifications for suitability in wet environments.

Knauf Regular Board complies with TS EN 520 + A1 standards, ensuring that it meets essential performance criteria for gypsum boards used in construction applications.

The Knauf Regular Board consists of an aerated gypsum core with premium paper liners on both sides, providing a smooth surface ready for finishing.