Legrand Belanko S 13A 250V Switched Fused Connection Unit with Cord Outlet Ivory 617881

13 A Fused Connection Unit

Provides local overcurrent protection through a replaceable 13 A fuse, making the unit suitable for supplying compatible fixed domestic and light-commercial appliances such as cooker hoods, water heaters and similar equipment. The connected appliance load, cable size and protective device must be verified by a qualified electrician before installation.

Double-Pole Switched Isolation

The integrated switch provides convenient local control and isolation of the connected appliance, helping technicians carry out maintenance without operating the circuit at the distribution board. Installation should follow the appliance manufacturer’s requirements and applicable UAE electrical regulations.

Integrated Cable Outlet

A built-in flex outlet enables the appliance cable to exit the faceplate neatly, supporting an organised fixed-wiring installation without requiring a separate cable-exit accessory. Correct cable routing, strain control and termination practices help protect the flexible cord from excessive bending or accidental movement.

Installer-Friendly Terminal Identification

Clearly marked connection points support accurate line, neutral and earth termination, helping reduce wiring errors and speed up installation and inspection. Conductors must be correctly stripped, securely tightened and tested for continuity, insulation resistance, polarity and earthing by a competent electrician.

Belanko S Ivory Finish

The warm ivory faceplate coordinates with traditional interiors, neutral wall finishes and classic kitchen or office cabinetry. Its understated appearance makes it suitable for visible appliance connection points in villas, apartments, offices and other light-commercial spaces.

Flush-Mounted Appliance Spur Application

Designed as a compact local connection and isolation point for compatible fixed appliances in residential and office environments. The back box depth, conductor capacity, circuit rating and mounting arrangement should be checked before installation to ensure adequate wiring space and a secure, level finish.

UAE Installation Considerations

The fused connection unit should be installed by a qualified electrician in accordance with the relevant emirate’s electricity authority requirements, project specifications and applicable wiring regulations. Suitability for the intended circuit, environmental conditions and appliance load must be confirmed before energisation.

Country of Origin: France

Manufactured in France as part of the Legrand Belanko S wiring-accessory range, providing a coordinated option for projects where consistent electrical accessory styling and recognised manufacturer support are important.