Legrand Belanko S 2 x 2P Euro-US Socket 1 Gang 10A 250V and 15A 127V Anthracite 617762

Dual Euro and US 2-Pin Socket Configuration

Combines one Euro-format outlet and one US-format outlet within a single accessory, providing a practical connection point for compatible 2-pin plugs in offices, meeting rooms, hospitality spaces and other mixed-device environments without requiring separate socket plates.

Rated 10 A at 250 V for Euro Outlet

The Euro receptacle is rated for loads up to 10 A at 250 V, making it suitable for compatible low-current equipment and Class II appliances when installed on an appropriately protected circuit and used within the connected equipment manufacturer’s electrical ratings.

Rated 15 A at 127 V for US Outlet

The US receptacle is rated up to 15 A at 127 V for compatible devices and circuits. The socket does not convert or step down the UAE mains supply, so the connected appliance must support the actual supply voltage or be used with suitable voltage-conversion equipment.

Compact 1-Gang Dual-Outlet Design

Two low-profile outlets are consolidated into one 1-gang fitting, helping contractors maximise connection capacity while maintaining an organised wall layout in workstations, reception areas, executive offices and commercial interiors where installation space is limited.

Screw-Type Wiring Terminals

Screw terminals provide firm conductor clamping for a durable electrical connection and straightforward installation. Clear connection markings help electricians identify termination points accurately, supporting efficient fitting, inspection and future maintenance.

2-Pin Unearthed Connection

Both outlets are intended for compatible 2-pin, non-earthed plugs and are best suited to double-insulated or Class II equipment. They should not be used as a substitute for an earthed socket where the connected appliance requires a protective earth conductor.

Anthracite Belanko S Finish

The contemporary anthracite colour complements modern office furniture, dark metalwork and neutral architectural finishes, giving electrical installations a coordinated and professional appearance in commercial and residential interiors.

Professional UAE Installation Requirement

Installation should be completed by a qualified electrician using correctly sized conductors, suitable circuit protection and approved back boxes, in accordance with applicable UAE electrical regulations, local authority requirements and the project’s approved wiring design.