Legrand Belanko S 4-Gang 1-Way Switch 16AX 250V Anthracite 617706

4-Gang Independent Circuit Control

Four separate switch rockers allow independent control of up to four lighting circuits from one wall position, helping contractors consolidate ambient, task, accent and feature lighting controls into a neat, space-efficient installation.

1-Way Switching Configuration

Each gang is designed for single-point control of its connected circuit, making the switch suitable for rooms and areas where lighting is operated from one location. For control from two or more positions, a compatible two-way or intermediate switching arrangement is required.

16AX Rated Current at 250 V AC

The 16AX rating is intended for lighting circuits and accounts for the higher inrush characteristics associated with fluorescent and certain inductive lighting loads. Connected LED drivers and electronic ballasts should remain within the manufacturers' current and inrush limits, with circuit protection selected by the project electrical designer.

Modern Anthracite Finish

The dark anthracite surface provides a contemporary appearance that coordinates effectively with concrete finishes, dark joinery, metal hardware and modern interior palettes in residential, hospitality, office and commercial projects.

Slim Four-Gang Faceplate

A clean, consolidated faceplate reduces wall clutter while providing convenient access to four controls. Its streamlined Belanko S design supports visually consistent electrical accessories across modern interior fit-out applications.

Rigid Mounting Support

The stable backing structure assists installers in maintaining correct alignment during fixing and helps the assembled switch remain secure and visually level under frequent daily operation, subject to installation in a compatible wall box.

Clearly Identified Terminals

Clearly marked connection points support faster conductor identification and orderly termination, helping qualified electricians reduce wiring errors and commissioning rework. All connections must be completed with the supply isolated and in accordance with the manufacturer's instructions.

Suitable for UAE Electrical Installations

Rated for 250 V AC applications, the switch is suitable for specification within typical UAE low-voltage building installations when circuit design, conductor sizing, protective devices, mounting boxes and installation practices comply with applicable local authority regulations and project requirements.

Professional Installation Requirement

Installation and testing should be undertaken by a qualified electrician, with the circuit de-energised before work begins. Load compatibility, terminal tightness, insulation condition, earthing continuity where applicable and correct protective-device coordination should be verified before energisation.

Legrand Belanko S Product Range

As part of the Belanko S range, this switch enables contractors and designers to maintain a coordinated accessory style across a project while benefiting from a recognised electrical equipment manufacturer's approach to functionality, installation quality and interior presentation.