Legrand Belanko S 45A 1-Gang Flex Outlet Anthracite 617786

45 A heavy-duty flex outlet

Designed to provide a dedicated cable exit for compatible high-current fixed appliances and equipment. The connected load, conductor size, circuit protection and installation method must be verified by a qualified electrician against the project electrical design and applicable UAE requirements.

1-gang Belanko S configuration

The compact single-gang format provides a clean termination point without the bulk of a conventional plug-and-socket connection, making it suitable for residential, office and light-commercial interiors where permanently connected loads are specified.

Neat cord-exit arrangement

The enclosed cable aperture helps guide the appliance flex through the front plate for an orderly finish while reducing exposed openings. This supports professional-looking installations behind or close to fixed equipment, subject to correct cable routing and strain management.

Clearly identified terminals

Marked live, neutral and earth connection points assist electricians with accurate conductor placement, helping simplify wiring, inspection and commissioning. All terminations should be tightened to the manufacturer’s requirements and tested before energisation.

Recommended 35 mm back-box depth

A back box with a minimum recommended depth of 35 mm provides practical space for heavier conductors, terminal access and controlled cable bends. The installer should confirm box compatibility and allow additional depth where conductor size, cable routing or project conditions require it.

Anthracite finish

The dark anthracite colour coordinates effectively with contemporary switches, sockets, matte hardware and darker interior finishes, delivering a consistent appearance across modern homes, offices, hospitality spaces and commercial fit-outs.

Professional fixed-load application

Suitable for compatible fixed electrical loads where a 45 A flex outlet is called for by the approved design. Final suitability depends on the appliance rating, cable specification, protective device, isolation arrangement and local authority requirements.

Installation and compliance requirements

Installation should be completed and tested by a qualified electrician in accordance with the manufacturer’s instructions, the relevant edition of BS 7671 where adopted, and applicable UAE electrical regulations, including project-specific DEWA, ADDC or other local authority requirements.

Legrand Belanko S range

Part of Legrand’s Belanko S wiring-accessory family, this outlet supports a coordinated interior specification alongside compatible products from the same range. Confirm the matching back box, plate arrangement and accessory compatibility before installation.

Country of origin: France

Manufactured in France and intended for professional electrical installations where dependable construction, clear circuit termination and a refined architectural finish are important selection considerations.