Legrand Belanko S 500W 1-Gang Rotary Dimmer with Push On/Off Ivory 617831

500 W resistive lighting load capacity

Designed to control compatible incandescent and mains-voltage halogen lighting loads up to 500 W, providing a practical solution for residential bedrooms, living rooms, lounges and similar indoor spaces. The connected load type, total wattage and lamp compatibility should be verified before installation; this rating should not be assumed to cover LED or fluorescent lamps.

Rotary control with push-on/push-off switching

Combines switching and dimming in one intuitive control: press the knob to turn the lighting on or off, then rotate it to adjust brightness. This simple operating method supports convenient everyday use and reduces the need for separate switching and dimming devices.

Smooth, adjustable light output

Provides progressive brightness adjustment for creating comfortable ambient, task or low-level lighting scenes. Occupants can tailor illumination to suit reading, relaxation and nighttime use while avoiding the fixed output of a conventional wall switch.

1-gang Belanko S configuration

Controls one compatible lighting circuit from a single wall position and integrates with the Legrand Belanko S wiring-device range. The compact 1-gang arrangement is suitable for straightforward room-lighting applications and coordinated switch layouts.

Ivory classic-look finish

The warm ivory colour complements traditional, neutral and classic interior palettes, making the dimmer suitable for bedrooms and residential spaces where a softer appearance is preferred. Its coordinated faceplate and rotary knob provide a clean, consistent installed finish.

Clearly identified wiring terminals

Terminal legends support accurate conductor identification and help qualified electricians complete wiring efficiently, reducing the risk of connection errors and installation callbacks. The circuit must be isolated before work, and installation should follow the manufacturer’s instructions, applicable UAE authority requirements and BS 7671 where specified for the project.

Indoor fixed-wiring application

Intended for permanently installed indoor lighting-control circuits in residential and light-commercial environments. For reliable operation, it should be installed in a compatible wall box with suitable cable terminations, adequate enclosure depth and appropriate protection against overload and short circuit.