Legrand Belanko S Universal Rotary Dimmer 1-Gang 75 300 W White 617635

Universal phase-cut dimming

Supports leading-edge and trailing-edge dimming control, helping installers achieve smooth, stable adjustment across compatible dimmable LED, CFL, halogen and incandescent lighting loads. Lamp and driver compatibility should be confirmed before installation to minimise flicker, restricted dimming range or unwanted noise.

75–300 W rated load range

Designed to control compatible lighting loads within the specified 75–300 W operating range, making it suitable for residential lighting circuits such as bedrooms, living spaces and similar indoor applications. The connected load must remain within the applicable rating for the selected lamp technology.

Rotary control with push on/off operation

Combines intuitive rotary brightness adjustment with convenient push-button switching in one control point. Users can switch the lighting on or off quickly and then fine-tune the illumination level for comfort, ambience or task requirements.

1-gang Belanko S configuration

Provides control of one lighting circuit from a compact wall-mounted accessory, making it a practical choice for new installations, refurbishment work and coordinated replacement of standard switches within the Legrand Belanko S range.

Clearly identified wiring terminals

Printed terminal markings support accurate conductor identification and orderly termination, helping qualified electricians complete installation and inspection efficiently. Wiring should be carried out in accordance with the manufacturer’s instructions and the applicable UAE electrical authority regulations.

Minimal white finish

The clean white faceplate and understated rotary control coordinate easily with light-coloured walls and contemporary interiors. Its neutral appearance is well suited to bedrooms, apartments, villas, hotels and other residential or hospitality spaces.

Professional indoor lighting control

Engineered for reliable everyday dimming when paired with compatible lamps, drivers and correctly sized circuits. Installation should be completed by a qualified electrician, with circuit isolation, load verification and compliance with relevant UAE wiring requirements confirmed before energisation.