Legrand Belanko S Universal Rotary Dimmer 75-300W 1 Gang Anthracite 617735

Universal phase-cut dimming

Supports compatible dimmable LED, CFL, halogen and incandescent lamps, giving contractors a versatile control solution for lighting retrofits and new interior fit-outs. Lamp compatibility and the applicable load range should be verified against the lamp manufacturer's dimming data before installation.

75–300 W rated load range

Designed to control lighting loads within a nominal 75–300 W range, subject to the connected lamp technology and driver characteristics. Correct load matching helps provide stable adjustment, reliable switching and consistent lighting performance.

Leading-edge and trailing-edge compatibility

Phase-cut control supports compatible electronic and conventional lighting loads, helping installers achieve smoother dimming across a wider selection of lamps and drivers. The selected lamp or driver must be specifically identified as dimmable.

Push-on/off rotary operation

Combines switching and brightness adjustment in one intuitive control: press the knob to turn the lighting on or off and rotate it to set the required illumination level. This simple interface is convenient for bedrooms, residential spaces and hospitality interiors.

1-gang Belanko S configuration

Provides dedicated control for one lighting circuit in a compact wall-mounted format. The Belanko S platform supports a coordinated appearance with matching switches and wiring accessories used throughout residential and commercial projects.

Clearly identified connection terminals

Labelled terminals assist electricians with accurate conductor placement and efficient installation during fit-out or replacement work. Installation, circuit protection and cable selection should comply with applicable UAE electrical regulations and project requirements.

Anthracite finish

The dark neutral finish complements contemporary interiors, including matte metal hardware, stone finishes and modern joinery. It is well suited to bedrooms, apartments, villas, hotels and other design-focused spaces.

Professional installation requirement

For safe and dependable performance, the dimmer should be installed by a qualified electrician after confirming supply compatibility, minimum and maximum connected load, lamp-driver suitability and enclosure conditions. Power must be isolated before installation or maintenance.