Legrand Mallia Senses 3-Gang 2-Way Switch 16AX 250V Dark Bronze 281005DB

3-Gang Triple-Circuit Control

Three independent switch mechanisms are combined in one assembly, allowing users to control three lighting circuits from a single wall position. This consolidated arrangement reduces wall-plate clutter and is well suited to living rooms, corridors, meeting rooms, open-plan offices and other spaces with multiple lighting zones.

2-Way Switching Configuration

Each gang supports two-way switching, enabling the connected circuit to be operated from either of two locations when paired with a compatible two-way switch and correctly wired. This arrangement is practical for corridors, staircases, bedrooms with bedside control and rooms with more than one entrance.

16AX Rated Current

The 16AX rating is intended for lighting circuits, including loads that may produce higher switching inrush currents than conventional resistive loads. Circuit loading, lamp-driver compatibility and protective-device selection should remain within Legrand guidance and the approved electrical design.

250 V AC Operating Rating

Rated for operation at up to 250 V AC, the switch is suitable for typical UAE low-voltage lighting installations operating at 230 V AC and 50 Hz. Final installation must comply with applicable UAE electrical regulations, project specifications and the requirements of the relevant local authority.

Clearly Identified Screw Terminals

Clearly marked terminals help qualified electricians identify common and traveller connections during installation, supporting accurate two-way circuit wiring and efficient inspection. Conductors must be prepared, terminated and tightened to the manufacturer-specified torque to maintain a secure electrical connection.

Rigid Mounting Support

The reinforced mounting structure helps maintain switch alignment and consistent faceplate seating after installation. This provides a neat finished appearance and dependable operation when fitted to a compatible flush box on properly prepared walls.

Dark Bronze Decorative Finish

The warm dark bronze finish complements timber, brass-toned hardware, stone surfaces and contemporary interior palettes. It provides a coordinated premium appearance for residential villas, apartments, hospitality interiors, executive offices and other design-led projects.

Indoor Residential and Commercial Application

Designed for fixed indoor switching applications in homes and offices, this unit is suitable for dry internal locations when installed within its specified environmental limits. It should be installed by a qualified electrician in accordance with the manufacturer’s instructions, BS 7671 principles where specified and applicable UAE authority requirements.

Legrand Mallia Senses Range Compatibility

As part of the Mallia Senses wiring-accessory range, the switch supports a consistent visual scheme across compatible switches, sockets and control accessories. Installers should verify matching frames, mounting boxes and associated mechanisms before procurement to ensure complete system compatibility.

Country of Origin: France

Manufactured in France, the switch provides a clearly identified origin for project documentation, material submittals and procurement records. Contractors should confirm consultant approval and any project-specific certification requirements before installation.