Legrand Synergy 3-Gang 2-Way 20AX Switch White 730133

3-Gang Independent Switching

Three separate switch mechanisms allow independent control of three lighting circuits from one wall position. This configuration supports zoned and layered lighting layouts while reducing the number of individual accessories required in residential, office, hospitality and light-commercial installations.

2-Way Circuit Control

Each circuit can be incorporated into a correctly designed two-way switching arrangement, enabling the same connected load to be controlled from two locations. It is particularly suitable for corridors, staircases, long rooms, open-plan offices and spaces with multiple access points.

20AX Rated Switching Capacity

The 20AX rating provides enhanced switching capability for lighting circuits, including loads that may produce elevated inrush current at start-up. Circuit loading, conductor sizing and protective devices must be selected by a qualified electrician in accordance with the connected load and applicable UAE electrical regulations.

Durable Synergy Mechanism

The reinforced switch body and robust internal operating mechanism are designed to withstand frequent manual operation in busy homes, offices and circulation areas. This construction supports dependable everyday switching and helps reduce premature wear in high-use installations.

Clear Terminal Arrangement

Clearly arranged connection points help electricians identify the common and switched conductors required for two-way wiring. This supports efficient installation, testing and maintenance while reducing the likelihood of connection errors during fit-out or replacement work.

White Contemporary Finish

The clean white fascia coordinates with common wall finishes, joinery and interior colour schemes used across UAE residential and commercial projects. Its understated appearance is suitable for apartments, villas, offices, meeting rooms, corridors and other modern interiors.

Suitable for UAE Electrical Projects

The switch is intended for fixed indoor electrical installations and should be installed by a competent electrician using a compatible mounting box and approved wiring accessories. Installation must follow the project specification, manufacturer instructions and applicable authority requirements, with reference to standards such as BS EN 60669-1 where required.

Application Versatility

Combining three circuits, two-point control and a higher switching rating in one accessory makes this switch suitable for controlling multiple lighting zones, selected ventilation loads or other compatible fixed loads. Connected equipment must remain within the switch rating and be verified for load type and inrush characteristics before installation.