Legrand Synergy 1-Gang Intermediate Switch 10AX 86 x 86 mm White 735407

Intermediate switching function

Designed to add an additional lighting control point between two 2-way switches, allowing one circuit to be operated from three or more locations. This configuration is practical for corridors, staircases, large rooms, villas, offices and other spaces requiring convenient multi-way control.

10AX rated current

The 10AX rating supports dependable switching of common residential and commercial lighting loads, including circuits with higher starting currents than basic resistive loads. Circuit loading, protective devices and conductor sizing must be verified by a qualified electrician before installation.

Single-pole intermediate configuration

Provides the crossover switching arrangement required within a correctly designed multi-way circuit. It is intended for use with compatible 2-way switches and should not be treated as a standalone 1-way lighting switch.

Clearly labelled terminals

Terminal identification helps electricians connect the strapper conductors correctly during installation, inspection and fault finding. Clear markings support more efficient wiring and reduce the likelihood of connection errors in multi-way lighting circuits.

Standard 86 × 86 mm footprint

The standard square format is suitable for installation on compatible 86 × 86 mm back boxes, making the switch practical for new construction, fit-out projects and replacement work in UAE residential and commercial properties.

35 mm minimum back-box depth

A compatible 35 mm-deep back box provides suitable space for the switch mechanism and associated strapper wiring. Installers should confirm available box depth, conductor arrangement and cable bend radius before final fixing.

White Synergy finish

The neutral white faceplate delivers a clean, professional appearance that coordinates with other white devices in the Legrand Synergy range. It is suitable for home, office, hospitality and general commercial interiors where a consistent electrical accessory finish is required.

Installation requirements

Installation should be completed by a qualified electrician with the supply isolated and tested before work begins. The circuit must be designed and verified in accordance with applicable UAE electrical regulations, local authority requirements and the project specification.

Country of origin

Manufactured in France, providing buyers with a clearly identified origin for procurement records, project documentation and material submittals.