Legrand Synergy Sleek 5A 250V Switched Socket Brushed Stainless 4mm 832069

5A, 250V AC Rating

Rated at 5A and 250V AC for controlled lighting points and other suitable low-power applications. The socket is appropriate for residential, hospitality, and office installations operating on the UAE nominal 230V, 50Hz electrical supply, subject to circuit design, load verification, and installation by a qualified electrician.

Controlled Lamp Circuit Point

Designed to provide a dedicated connection point for table lamps, floor lamps, and similar portable luminaires controlled through the building’s lighting system. This arrangement supports convenient central or wall-switch control in lounges, bedrooms, hotel suites, reception areas, meeting rooms, and executive offices.

Integrated Single-Pole Switch

The built-in single-pole rocker switch allows the connected load to be isolated directly at the outlet, providing convenient local control during normal use, cleaning, or lamp replacement. Its crisp switching action supports reliable operation in frequently used domestic and commercial interiors.

British Standard 5A Socket Configuration

The three-pin 5A socket format helps distinguish controlled lighting outlets from general-purpose power sockets, reducing the likelihood of inappropriate higher-load appliances being connected. It is intended for use with a matching 5A plug and must be installed in accordance with the project specification and applicable UAE electrical regulations.

Shuttered Socket Aperture

The integrated safety shutter helps restrict accidental access to live internal contacts when a compatible plug is not inserted. This provides an additional layer of protection for installations in homes, offices, guest rooms, and shared spaces while supporting professional electrical safety practices.

304L Brushed Stainless-Steel Front Plate

The austenitic 304L stainless-steel faceplate offers good resistance to corrosion, routine handling, and everyday impacts in interior environments. Its brushed finish provides a refined appearance that coordinates effectively with contemporary décor, metal hardware, glass partitions, and premium architectural finishes.

Ultra-Slim 4mm Profile

The slim 4mm front-plate profile creates a discreet, close-to-wall appearance for high-quality interior fit-outs. It is particularly suitable for modern villas, apartments, hotels, offices, and commercial spaces where clean lines and minimal projection are important design requirements.

Screwless Clip-On Design

The clip-on decorative plate conceals mounting screws after installation, producing a neat and professional finish without visible fixings. The removable front plate also supports easier access during final adjustment, inspection, or maintenance while helping protect the finished appearance of the installation.

Installer-Friendly Terminals

Captive, backed-off terminal screws and generously sized angled cable entries facilitate faster conductor insertion and secure termination. Clearly identified terminals help reduce wiring errors and support efficient installation into a compatible back box by qualified electrical personnel.

Residential and Commercial Application

Suitable for controlled lamp circuits in living rooms, bedrooms, reading areas, hotel suites, offices, meeting rooms, and reception spaces. Final selection should account for the connected load, conductor size, protective device, earthing arrangement, back-box compatibility, and the requirements of the relevant UAE authority and project consultant.