Lifmex 1 Ton (3Mtr) Manual Stacker, LHHS1

Key specs include a 1000 kg lifting capacity and a maximum lift height of 3 meters. It features a robust steel chassis, an ergonomic handle with easy-to-use control buttons, a safety locking system, and a spring‑loaded lowering control for controlled descent. The design includes a wide wheelbase for stability and easy maneuverability, plus adjustable height platform options for different pallet heights.

Basic operation steps: position the forks under the load, ensure the load is centered and stable, engage the safety lock, pump the hydraulic handle to lift to the desired height, move slowly to the stacking location, align the pallet, and lower the load gradually using the lowering control. Always keep hands clear of moving parts, check the fork alignment, and never exceed the 1000 kg rating.

It includes a safety locking system to secure the load during movement and a spring‑loaded lowering control for smooth, controlled descent. The corrosion‑resistant steel frame and stable wide base enhance safety by providing a reliable, sturdy platform. Always engage the lock before moving, inspect the wheels and forks for damage, and operate at a safe speed on even floors.

Ideal for warehouses and factories that need occasional or routine pallet lifting and stacking without electricity. It’s well-suited for moving pallets between aisles, stacking loads to intermediate heights, and placing goods onto shelves or ramps where pallet-by-pallet handling is required.

There is no electrical installation required. Place the stacker on a flat, stable surface, ensure the forks are clean and aligned, perform a quick visual inspection, and confirm the load capacity is appropriate for the pallet you’re handling. The unit is designed for easy assembly and ready use out of the box, with no special tools needed.

If you’re evaluating options, consider these on Fepy.com: Lifmex Electric Stacker (for powered lifting) - https://fepy.com/search?q=Lifmex%20Electric%20Stacker and Lifmex 1.5 Ton Manual Stacker - https://fepy.com/search?q=Lifmex%201.5%20Ton%20Manual%20Stacker. These provide options with different power profiles and capacities, allowing you to balance cost, maintenance, and throughput against your needs.

The LHHS1 is designed for standard pallet handling up to 1000 kg. Ensure the pallet width and length fit within the stacker’s fork dimensions and that the load’s center of gravity remains within the safe operating range. Do not attempt to lift nonstandard or unstable loads that exceed the rated capacity.

Regular maintenance tips include keeping moving parts clean, lubricating the pivot points and wheels as recommended, inspecting forks for wear or cracks, and checking the hydraulic system for leaks. Store the stacker on a flat surface and avoid exposing it to harsh weather for prolonged periods to preserve the corrosion‑resistant finish.

The LHHS1 offers a balance of manual operation, solid steel construction, and a 1,000 kg capacity, which can be cost‑effective for facilities that don’t require electric lifting. When evaluating value, compare total cost of ownership (initial price, maintenance, and expected lifespan) against electric or higher‑capacity models available on Fepy to choose the option that best fits your throughput and budget.

Before stacking, verify the load is secure and centered, and ensure the truck path is clear. Lift slowly, keep the load low during movement, and only raise to the minimum height needed for placement. After placing, lower the forks fully and engage the lock before moving to the next task to minimize risk of tipping or pallet shift.