Makita D-00446 SDS-Plus Hammers Plus Type Bit 6 x 110mm

Specifications: 6 mm diameter, 110 mm length, carbide tip for durability, SDS-Plus shank for secure attachment, compatible with Makita SDS-Plus hammer drills, designed for concrete, masonry, brick, and stone, with features aimed at vibration reduction and dust removal efficiency.

This bit is ideal for drilling into tough materials like concrete, masonry, brick, and stone. It’s built to perform well in these substrates, offering straight, accurate holes with minimized wear and tear.

The SDS-Plus shank provides a secure, high-torque connection that enables efficient power transfer from the hammer drill to the bit. This reduces slippage, improves hole quality, and allows for quicker drilling in hard materials when used with an SDS-Plus hammer drill.

Insert the bit directly into an SDS-Plus hammer drill’s chuck until it seats fully. Use in hammer drill mode with appropriate RPM for the material. Avoid side pressure, keep the drill straight, and allow the bit to do the work—don’t force it. If possible, use a dust extraction system to maintain a cleaner work area.

Wear eye protection, hearing protection, and a dust mask or respirator as needed. Secure the workpiece, avoid overheating the bit by using steady pressure and intermittent drilling, and stop immediately if you notice unusual vibration, cracking, or dull cutting. Keep hands and clothing away from rotating parts.

Operate at the recommended speeds for the material, avoid sideways loads, and use proper dust extraction to reduce debris buildup. Allow cooling breaks if drilling deep holes, and remove the bit intermittently to prevent overheating and wear on the carbide tip.

Common use cases include anchoring in concrete or brick, drilling precise small-diameter holes for fixtures, and medium-depth drilling in masonry, stone, or similar substrates where a clean, accurate hole is required.

If you’re exploring alternatives on Fepy, you can compare similar 6x110mm SDS-Plus bits from other brands to assess price, durability, and performance. Use the site’s search to view options and read spec comparisons: https://fepy.com/search?q=bosch+sds+plus+6x110mm and https://fepy.com/search?q=dewalt+sds+plus+bit+6x110mm and https://fepy.com/search?q=makita+d-00446+sds+plus+6x110. These pages show different carbide tip designs, coating, or brand-matched compatibility that may influence long-term value.

If you’re not fully satisfied with the Makita D-00446 SDS-Plus Bit, you can rely on Fepy’s return options as stated in the site’s return policy. Ensure the item is unused and in its original packaging within the allowed return window for eligibility.

This bit is designed for use with Makita SDS-Plus hammer drills. To maximize performance and safety, pair it with a Makita SDS-Plus hammer drill that supports 6 mm bits and ensure the drill is in SDS-Plus mode during operation.