Makita SDS-Plus Concrete Drill Bit 14×160 mm, Heavy-Duty Carbide, Quick Cut, Long Life

This drill bit is designed for drilling large-diameter holes quickly and accurately in concrete and masonry using an SDS-Plus hammer drill. It’s ideal for installation work, anchors, and heavy-duty masonry drilling where a reliable, long-life bit is needed.

It features a tungsten carbide tip for superior cutting power and durability, an enhanced spiral design for faster drilling and better dust clearance, and a robust construction that tolerates impact and wear. The result is faster holes with extended bit life in tough materials.

Yes. It is designed to be compatible with all SDS-Plus hammer drills, ensuring a secure fit and reliable performance across common SDS-Plus tools.

1) Inspect both drill bit and tool shank for damage. 2) Clean the bit shank and insert fully into the SDS-Plus chuck, ensuring a secure engagement. 3) Use moderate drilling pressure and let the bit do the work; avoid forcing it. 4) Start at a low speed, then gradually increase to a steady pace while applying steady, straight pressure. 5) Use a dust extraction setup when possible to improve visibility and dust control. 6) Withdraw the bit periodically to clear debris and allow cooling.

Best suited for concrete and masonry work, such as installing anchors, conduit runs, and other large-diameter holes in structural or exterior masonry. Its carbide tip and design are optimized for tough, aggregate-filled concrete.

Keep the bit cool by drilling with steady pressure and using intermittent drilling to prevent overheating. Clean dust and debris after use, store in a dry place, and avoid bending or striking the bit edge. Use the proper drill speed and avoid aggressive side pressure that can dull the tip.

Wear eye protection, hearing protection, and a dust mask when drilling into concrete. Secure the workpiece, keep hands clear of the drill area, and ensure the drill is unplugged or the battery is removed when changing bits or making adjustments.

- Bosch SDS-Plus Concrete Drill Bit 14×160 mm: typically features Bosch’s carbide tip and optimized geometry for fast cutting and good dust clearance. See: https://fepy.com/product/bosch-sds-plus-concrete-drill-bit-14x160-mm - DEWALT SDS-Plus Concrete Drill Bit 14×160 mm: known for rugged construction and reliable performance in masonry applications. See: https://fepy.com/product/dewalt-sds-plus-concrete-drill-bit-14x160-mm - Ryobi SDS-Plus Concrete Drill Bit 14×160 mm: often provides good value with solid performance for general-purpose masonry drilling. See: https://fepy.com/product/ryobi-sds-plus-concrete-drill-bit-14x160-mm These options are available on Fepy.com and can be compared for price, availability, and any tool-specific features you value (tip geometry, coating, and overall build).

Expect efficient cutting with reduced vibrations thanks to its design, especially on 14 mm holes in concrete and masonry. Performance will vary with drill power, material composition, and technique; maintaining a steady speed and proper cooling will yield cleaner holes and longer bit life.

Yes: use a sharp, clean bit; ensure your drill’s chuck is tight; avoid overheating by drilling in short bursts if needed; use a dust extractor to keep the work area clear; and check the bit periodically for wear or chipping. For larger holes, steady and straight feeding is crucial to prevent wandering and ensure a clean bore.

This Makita SDS-Plus 14×160 mm drill bit is designed for professional-grade performance, offering durability and efficiency that suit construction, installation, and heavy masonry work.