Makita D-17918 235mm x 80 Teeth MDF Cutting Blade

Key specs: diameter 235 mm; 80 teeth; kerf 2.8 mm; arbor bore 30 mm; maximum operating speed up to 6,000 RPM; material Tungsten Carbide Tipped; suitable for MDF cutting; compatible with saws that have a 30 mm arbor.

If your saw accepts a 235 mm blade with a 30 mm arbor, this blade will fit. Always verify your saw’s arbor size and rated blade diameter before mounting.

Safety first: unplug the saw, remove the old blade, and ensure the blade is oriented so the teeth are moving in the correct direction. Mount the blade on the arbor, tighten the arbor nut securely, and recheck that the blade spins freely without interference before powering on.

With 80 teeth and 2.8 mm kerf, you should expect a smooth, clean cut with minimal edge chipping on MDF. The 80-tooth count helps produce a finer surface suitable for cabinetry and detailed joinery.

To maximize life: keep blades clean after use, avoid overheating by using proper feed rates and adequate ventilation, using a scoring cut for delicate panels if needed, store the blade in a protective case, and avoid cutting through non-MDF materials that could dull the teeth quickly.

Compared to lower-tooth-count MDF blades (e.g., 60T), the 80T blade generally provides finer, less aggressive cuts with smoother edges. Compared to higher-tooth blades (e.g., 96T), the 80T blade balances speed and edge quality for MDF work. For specific alternatives on Fepy, you can explore options like Makita 60T MDF blades or Bosch 80T MDF blades to see how tooth count and brand affect cut quality and price. Example alternatives (verify on Fepy): Makita 60T MDF blade at https://fepy.com/product/makita-d-17898-235mm-60t-mdf-blade and Bosch 80T MDF blade at https://fepy.com/product/bosch-235mm-80t-mdf-blade.

Ideal for MDF cabinetry, shelving, drawer faces, cabinet doors, and other fine woodworking tasks where clean edges and smooth finishes are important. It’s suited for finishing cuts, dadoes, and cross-cuts on MDF panels.

Wear eye and hearing protection, keep hands away from the cutting area, ensure the saw is unplugged during installation, use clamps to secure MDF pieces, avoid kickback by making straight, stable cuts, and allow the blade to reach operating speed before starting a cut.

The Makita D-17918 with 80 teeth offers a balance of cut quality and durability due to tungsten carbide tips and a reasonable kerf for MDF. When comparing value, consider tooth count, kerf, bore compatibility, and expected blade life. If you prioritize extremely fine edges, you might look at higher-tooth variants; if you prioritize faster stock removal, a lower-tooth blade may be preferable. Always compare price, lifespan, and cut quality across available MDF blades on Fepy to determine the best value for your specific projects.

If you’re not satisfied with the blade, you can initiate a return per Fepy’s standard return policy within the applicable window, provided the blade is unused and in its original packaging. Always verify current return terms at the time of purchase.

This blade uses a 30 mm arbor and is compatible with many 30 mm arbor circular saws beyond Makita, as long as the tool supports a 235 mm blade. Always confirm your tool’s arbor size and maximum blade diameter before use.