Makita D-06579 HSS Metal Drill Bit 10 x 133mm - 5 Pcs/Set

Key specs: 5 pieces in the set; 10 mm diameter; 133 mm length per bit; High-Speed Steel (HSS) construction; rust/corrosion-resistant coating; optimized cutting edges for faster, smoother drilling; designed for universal compatibility with most drill models.

They're designed for drilling metals such as steel and aluminum, as well as other hard materials. The HSS construction and optimized edge design help you achieve clean, accurate holes with reduced heat buildup.

1) Secure the workpiece with clamps. 2) Mark the hole and (if possible) create a center punch indentation. 3) Start drilling at a low speed to establish a pilot hole, then increase speed gradually. 4) Use steady pressure and a slow, smooth feed to prevent heat buildup. 5) Withdraw periodically to clear chips and apply light cutting fluid if needed.

Wipe bits clean after use to remove metal shavings, dry them thoroughly, and store them in a dry, organized case to prevent rust. If you notice any dullness or wear, consider replacing the bits to maintain hole quality. The coating provides extra protection against rust for extended service life.

Always wear eye protection and gloves. Secure the workpiece, keep hands away from the rotating bit, and avoid loose clothing. Use clamps, a backing material if needed, and maintain a steady feed rate to prevent bit breakage or workpiece damage.

If you’re considering alternatives on Fepy, here are comparable options to explore: - Makita D-06571 HSS Drill Bit Set (13pc): https://fepy.com/product/makita-d-06571-hss-drill-bit-set-13pc - Bosch HSS Drill Bit Set (50pc): https://fepy.com/product/bosch-hss-drill-bit-set-50pc - DeWalt HSS Drill Bit Set (21pc): https://fepy.com/product/dewalt-hss-drill-bit-set-21pc Each offers a mix of sizes and piece counts; choose based on your common hole sizes and frequency of use.

The bits are designed for universal compatibility and will fit most standard drill chucks. If your drill accepts standard shank sizes, you should be able to use these bits without issue.

They’re well-suited for automotive work, metal fabrication, home metal projects, DIY metal repair, and any task requiring clean, deep holes in steel or aluminum.

The 5-piece set provides a ready assortment for common metal drilling tasks, ensuring you have matched, consistent quality across multiple holes. It’s cost-effective and minimizes the need to search for individual bits, while the 10 mm/133 mm size is a versatile combination for many metal projects.

Fepy offers a buyer-friendly return policy for items that meet the return criteria. If you’re not satisfied, you can initiate a return within the specified window and in accordance with the listed terms to help you assess value and suitability.